Skip to content
Easy Wood Tools 3 Ci1-R2-NR

Easy Wood Tools Set of 3 Ci1-R2-NR Square Negative Rake Carbide Cutters #1600NR

by Easy Wood Tools
$51.27 - $51.27
$51.27
$51.27
$51.27 - $51.27
$51.27
SKU 466255

This is an authentic, made in the USA, Easy Wood Tools (EWT) set of 3 Ci1-R2-NR square negative rake carbide cutters with 2" radius designed for use with Full-Size and Pro roughers. Negative rake cutters have been shown to produce better cuts in man-made acrylics, hard exotic woods and end grain, producing a better finish and less "grabs" and better edge life. Size: 0.580" x 0.100". Comes with replacement 8-32 countersink machine screws. Comes with additional storage container with ten (10) 1" x 1" x 5/16" compartments to store and protect replacement cutters when not in use.

Model #: 1600NR

Authentic EWT cutters have the optimal 3G’s of Carbide - Grade, Grind, and Geometry. Only when grade, grind, and geometry are in harmony will you have a cutting edge for high performance woodturning.

  • The Right Grade: Carbide is basically a mixture of tungsten powder and cobalt that is fused together under high pressure and heat. The ratio of cobalt to tungsten and the size of the tungsten particles are referred to collectively as the ‘grade’. There are literally hundreds of thousands of conceivable grades and no ‘one grade’ of carbide is suited for all applications – whether wood cutting or metal cutting. The perfect combination of cobalt and grain size in EWT carbide cutters yields a cutting edge that is both the keenest and the most durable grade for woodturning available today.
  • The Right Grind: EWT grinds all of their cutters on super rigid CNC grinders to prevent micro chipping of the cutting edges. EWT uses the proper grit diamond wheels to produce the flattest, truest surfaces possible with minimal grinding scratches left on the surface. All the cutter surfaces are ground in the optimum sequence to bring the edge into keenness during the very last process, or once again micro chipping of the cutting edges will occur if the proper sequence is not followed.
  • The Right Geometry: EWT grinds all their cutters to the correct angles and geometries specifically for woodturning. This produces an edge that cuts both cleanly and safely for all skill levels.

Prop 65WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov