Skip to content

New Products

  • 3M™ PSA Microfinishing/Lapping Film (AO)

    3M™ PSA Microfinishing/Lapping Film (AO)

    3M
    from $4.99

    3M™ manufacturers a wide range of abrasive materials utilizing numerous abrasives, backing materials and bonding agents. These precision microfinis...

    View full details
    from $4.99
  • Wood Tap and Die Sets

    Wood Tap and Die Sets

    Taytools
    from $39.95

    This wood thread cutting kit will effortlessly cut strong, tight fitting male/female OD/ID threads in wood for use in vices, clamps, toys, furnitur...

    View full details
    from $39.95
  • Wheel Marking Gauge Depth Gauge with Solid Brass Machined Head Black Chrome Beam

    Wheel Marking Gauge Depth Gauge with Solid Brass Machined Head Black Chrome Beam

    Taytools
    $16.99

    This is a well-made and economical marking/cutting gauge. A wheel larking gauge is an indispensable tool used in the shop to lay out precision wood...

    View full details
    $16.99
  • QUIK-CURE™

    Bob Smith Industries QUIK-CURE™ Epoxy 2 Part with Hardener 4.5 oz.

    Bob Smith Industries
    $12.99

    QUIK-CURE™ 5 min. Epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to h...

    View full details
    $12.99
  • Narex 3 Piece Mortise Chisel Set (6, 10, 12mm)

    Narex 3 Piece Mortise Chisel Set (6, 10, 12mm)

    Narex
    $49.99

    These mortise chisels are made by Narex of the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempere...

    View full details
    $49.99
  • Microjig MATCHFIT™ Dovetail Hardware Variety Pack (6-Pack)

    Microjig MATCHFIT™ Dovetail Hardware Variety Pack (6-Pack)

    Microjig
    $14.99

    Create jigs and shop fixtures with the incredibly versatile MATCHFIT™ Dovetail Hardware. With just a standard 1/2" 14-degree dovetail router bit, y...

    View full details
    $14.99
  • 14oz. Dead Blow Mallet with Non Marring Soft Faces

    14oz. Dead Blow Mallet with Non Marring Soft Faces

    Taytools
    $15.99

    This steel shot filled head dead blow mallet is designed to provide maximal force when struck and minimize rebound avoiding accidental damage to pr...

    View full details
    $15.99
  • IC-LOC™

    Bob Smith Industries IC-LOC™ Blue, Red, Green .34 oz Thread Locker Set

    Bob Smith Industries
    $17.99

    IC-LOC™ Blue is a medium thickness, medium strength threadlock that is applied to the threads of fasteners before assembly. Once the IC-LOC™ Blue i...

    View full details
    $17.99
  • SLOW-CURE™

    Bob Smith Industries SLOW-CURE™ Epoxy 2 Part with Hardener 4.5 oz.

    Bob Smith Industries
    $12.99

    SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and mor...

    View full details
    $12.99
  • Two sheets 5/16 x 5 x 12 Float Glass for Scary Sharp System

    Two sheets 5/16 x 5 x 12 Float Glass for Scary Sharp System

    Taytools
    $24.99

    This is a set of two pieces 5/16" x 5" x 12" float glass for use as a flat, hard surface in a the Scary Sharpening System Float glass is dead flat...

    View full details
    $24.99
  • Westhoff Mighty Mag® Bases  with 45 Pounds Pull and 6 Mounting Locations

    Westhoff Mighty Mag® Bases with 45 Pounds Pull and 6 Mounting Locations

    Westhoff
    from $19.99

    The Mighty Mag® test and dial indicator magnetic base is one of the most versatile and compact magnetic bases available. It has a rugged zinc dieca...

    View full details
    from $19.99
  • 3M™ 461X PSA Silicon Carbide Microfinishing/Lapping Film
    Sold out

    3M™ 461X PSA Silicon Carbide Microfinishing/Lapping Film

    3M
    from $5.99

    3M™ Microfinishing PSA Film Sheets are designed to help get the finest finish possible, in the least amount of time and can be easily cut to fit an...

    View full details
    from $5.99
    Sold out
  • 3M™ Non-PSA Microfinishing/Lapping Film (AO)
    Sold out

    3M™ Non-PSA Microfinishing/Lapping Film (AO)

    3M
    from $4.99

    3M™ manufacturers a wide range of abrasive materials utilizing numerous abrasives, backing materials and bonding agents. These precision microfini...

    View full details
    from $4.99
    Sold out
  • Microjig MATCHFIT™ Dovetail Nut Track Hardware (4-Pack)

    Microjig MATCHFIT™ Dovetail Nut Track Hardware (4-Pack)

    Microjig
    $12.99

    Create jigs and shop fixtures with the incredibly versatile MATCHFIT™ Dovetail Hardware. With just a standard 1/2" 14-degree dovetail router bit, y...

    View full details
    $12.99
  • Microjig MATCHFIT™ 1.5" Dovetail Track Hardware (4-Pack)

    Microjig MATCHFIT™ 1.5" Dovetail Track Hardware (4-Pack)

    Microjig
    $12.99

    Create jigs and shop fixtures with the incredibly versatile MATCHFIT™ Dovetail Hardware. With just a standard 1/2" 14-degree dovetail router bit, y...

    View full details
    $12.99
  • Microjig MATCHFIT™ 1" Dovetail Track Hardware (4-Pack)
    Sold out

    Microjig MATCHFIT™ 1" Dovetail Track Hardware (4-Pack)

    Microjig
    $12.99

    Create jigs and shop fixtures with the incredibly versatile MATCHFIT™ Dovetail Hardware. With just a standard 1/2" 14-degree dovetail router bit, y...

    View full details
    $12.99
    Sold out
  • 28oz. Dead Blow Mallet

    28oz. Dead Blow Mallet

    Taytools
    $18.99

    This steel shot filled head dead blow mallet is designed to provide maximal force when struck and minimize rebound avoiding accidental damage to pr...

    View full details
    $18.99
  • Pen Turning Lathe Mandrel Morse Taper MT1

    Pen Turning Lathe Mandrel Morse Taper MT1

    Taytools
    $15.99

    The big advantage of this pen mandrel is its ability to easily adjust to different blank sizes. Simple slide the brass compression fitting where yo...

    View full details
    $15.99
  • Pen Turning Lathe Mandrel Saver MT2 Liver Center

    Pen Turning Lathe Mandrel Saver MT2 Liver Center

    Taytools
    $17.99

    This mandrel saver is a must-have accessory for pen turners. Mandrels can easily deflect or bend when the tailstock center point is appropriately t...

    View full details
    $17.99
  • 1/4" Router Collet Extender

    1/4" Router Collet Extender

    Taytools
    $16.99

    This router collet extender will allow your router bits to extend an additional 2-1/4" letting you change router bits from above the table, without...

    View full details
    $16.99
  • Pen Turning Lathe Mandrel Saver MT1 Live Center

    Pen Turning Lathe Mandrel Saver MT1 Live Center

    Taytools
    $17.99

    This mandrel saver is a must-have accessory for pen turners. Mandrels can easily deflect or bend when the tailstock center point is appropriately t...

    View full details
    $17.99
  • Four Jaw Woodturning Lathe Chuck 1"x 8 TPI Set

    Four Jaw Woodturning Lathe Chuck 1"x 8 TPI Set

    Taytools
    $219.99

    This is an excellent value in a good quality woodturner’s chuck with numerous added features. Comes standard with 4 different serrated jaws, woodwo...

    View full details
    $219.99