Hardware

This T track is precision extruded and is 48" long, 3/8” thick and 3/4” wide. The inside groove will accept standard 1/4" hex bolts, 1/4" T bolts o...

This T track is precision extruded and is 36" long, 3/8" thick, and 3/4" wide. The inside groove will accept standard 1/4" hex bolts, 1/4" T bolts ...

25 piece set of threaded inserts. Made of high quality alloy steel with zinc plating. Will work with both hard and soft wood, plywood, and particle...

This T track is precision extruded and is 24" long, 3/8" thick and 3/4" wide. The inside groove will accept standard 1/4" hex bolts, 1/4" T bolts o...

These holds down clamps are perfect when you need to secure work pieces on router table, drill presses or other machines. The included 1/4" x 20 TP...

T Bolts are immensely useful when used in conjunction with extruded T track to fabricate a vast array of jigs and fixtures used in machining, work...

This 129 piece jig and fixture hardware kit will give you most everything you need to make your own custom clamping and holding jigs. This will sav...

These loose tenons are designed to work with slots created by the Festool Domino DF 500 and DF 700. These solid wood loose tenons are made from 100...

This T Wrench is perfect for manually installing threaded inserts straight and easily without damaging the surrounding wood or fasteners. Wrench is...

Mini starter kit contains a Mini stepped drill bit and 100 birch dowels Mini stepped dowels are 1-5/8" long and 1/4" in diameter and designed for ...

1X starter kit contains a 1X stepped drill bit and 50 birch dowels 1X stepped dowels are 2-3/4" long and 3/8" in diameter and designed for stock u...

T Bolts are immensely useful when used in conjunction with extruded T track to fabricate a vast array of jigs and fixtures used in machining, work...

THREADED INSERTS: 25-piece set of 1/4-20 threaded inserts. Made of high quality alloy steel with zinc plating. Will work with both hard and soft ...

10 pack/pieces knurled head solid brass thumb screws with straight shoulders and flat tips The knurled surface on these thumb screws provides opti...

This wood thread cutting kit will effortlessly cut strong, tight fitting male/female OD/ID threads in wood for use in vices, clamps, toys, furnitur...

Available in 40 or 100 packs 1X stepped dowels are 2-5/8" long and 3/8" in diameter and designed for stock up to 1" thick  Miller Dowels uses a pa...

Create jigs and shop fixtures with the incredibly versatile MATCHFIT™ Dovetail Hardware. With just a standard 1/2" 14-degree dovetail router bit, y...

Pack contains 100 each mini stepped walnut dowels Mini stepped dowels are 1-5/8" long and 1/4" in diameter and designed for stock up to 3/4" thick...

Create jigs and shop fixtures with the incredibly versatile MATCHFIT™ Dovetail Hardware. With just a standard 1/2" 14-degree dovetail router bit, y...