Tools > Dust Collection

Please note that each new Extractor now comes with one Fleece bag.  The innovative 3M Xtract™ Portable Dust Extractor allows for maximum dust ext...

Designed to connect two dust collection or shop-vac hoses or fittings together with an air-tight fit. Made from flexible rubber to accommodate slig...

This swivel elbow works like a ball-joint to prevent your hose from binding or pulling off the dust collector One end has a 4" inner diameter and ...

These reducers allow fitting of a 2.5" dust collection hose to a 4" hose Smaller end has 2.5" outer diameter and 2.3" inner diameter opening Large...

Both openings are 1.25" long and taper from 3.85" to 4" and will fit 4" flexible hose or tapered dust fittings Made from strong 1/8" thick abrasio...

Attach your dust hose to your dust collection fittings quickly and easily without tools. Simply squeeze both rubber grip ends to expand and release...

Turn screw to tighten quickly to secure hose in place Spring steel maintains pressure to hold hose securely in place Double-Loop design has tighte...

This version of our blast gates has a built-in wall mounting bracket to allow secure anchoring to the wall to prevent sloppy opening and closing. B...

Uses this universal blast gate mounting bracket to easily and quickly mount any 2-1/2" to 6" ABS or aluminum blast gate to any solid surface. Will ...

Blast gates are used to open and close branch ducts to divert airflow only to those machines in operation. This conserves air volume and keeps suct...

This version of our blast gates has a built-in wall mounting bracket to allow secure anchoring to the wall to prevent sloppy opening and closing. B...

Allows branching of dust collection to add every machine in the shop Nominal dimensions of openings are outer diameter of 2-7/16" and inner diamet...

Allows branching of dust collection to add every machine in the shop Nominal dimensions: outer diameter of openings are 2-7/16" and inner diameter...

These elbow connectors prevent binding or kinking when you need to bend a dust collector hose at sharper angles Nominal dimensions: both ends have...

These reducers allow fitting into a 2.5" dust port to a 4" hose Smaller end has 2.3" outer diameter and 2.13" inner diameter; Larger end has 3.98"...