Skip to content

Taytools Pair (2 pack) Safety Push Blocks with 3" x 6" Friction Pads

Taytools
Original price $14.99
Original price $14.99 - Original price $14.99
Original price $14.99
Current price $12.99
$12.99 - $12.99
Current price $12.99
in stock

Push blocks are an essential piece of shop safety equipment. They keep your hands and fingers far away from spinning blades and cutters and preven...

View full details
Original price $14.99
Original price $14.99 - Original price $14.99
Original price $14.99
Current price $12.99
$12.99 - $12.99
Current price $12.99
Save 13% Save %

Low Profile 1/2” High Workbench Bench Dogs for 3/4" Dog Holes 4 Pack

Taytools
Original price $6.99 - Original price $6.99
Original price $6.99
$6.99
$6.99 - $6.99
Current price $6.99
in stock

Drop these low-profile bench dogs in any 3/4 inch workbench dog holes and push your workpiece against them to stabilize parts and prevent them from...

View full details
Original price $6.99 - Original price $6.99
Original price $6.99
$6.99
$6.99 - $6.99
Current price $6.99

Workbench Plane Stop 2” Square Head with Toothed, Safe and V-Groove Sides, 3/4” x 2-3/8” Long Brass Post

Taytools
Original price $19.99 - Original price $19.99
Original price $19.99
$19.99
$19.99 - $19.99
Current price $19.99
Out of stock

A planing stop is a useful workbench work holding appliance. It can secure boards to a workbench for planing and other operations. Plane stops can ...

View full details
Original price $19.99 - Original price $19.99
Original price $19.99
$19.99
$19.99 - $19.99
Current price $19.99
Sold out

One sheet 5/16" x 5" x 12" Float Glass for Scary Sharp System

Taytools
Original price $0.00 - Original price $0.00
Original price $0.00
$18.68
$18.68 - $18.68
Current price $18.68
in stock

This is a piece of 5/16" thick x 5" x 12" float glass for use as a flat, hard surface in a the Scary Sharp™ sharpening system Float glass is dead ...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$18.68
$18.68 - $18.68
Current price $18.68

Diamond Grinding Wheel Cleaner / Dresser 36 Grit 467061

Taytools
Original price $8.89
Original price $8.89 - Original price $8.89
Original price $8.89
Current price $8.00
$8.00 - $8.00
Current price $8.00
in stock

Remove any debris or imperfection from your grinding wheel with this 36-grit grinder wheel dresser. Keeping your grinding wheel clean and straight ...

View full details
Original price $8.89
Original price $8.89 - Original price $8.89
Original price $8.89
Current price $8.00
$8.00 - $8.00
Current price $8.00
Save 10% Save %

New Old Stock Army Surplus Waterproof Storage Box USA Made 8" x 5" x 3"

Taytools
Original price $7.99 - Original price $7.99
Original price $7.99
$7.99
$7.99 - $7.99
Current price $7.99
in stock

These new old stock Army First Aid storage boxes were found in a surplus warehouse of a company in Rhode Island that built kits for the government...

View full details
Original price $7.99 - Original price $7.99
Original price $7.99
$7.99
$7.99 - $7.99
Current price $7.99

High Density Foam Router Bit Storage Tray (1/4" and 1/2" Holes) 731448

Taytools
Original price $16.99
Original price $16.99 - Original price $16.99
Original price $16.99
Current price $15.29
$15.29 - $15.29
Current price $15.29
in stock

Organize and protect router bits in drawers and on shelves with this handy tray. Overall size is 10.75" wide by 13" long by 1.125" thick. Will hold...

View full details
Original price $16.99
Original price $16.99 - Original price $16.99
Original price $16.99
Current price $15.29
$15.29 - $15.29
Current price $15.29
Save 10% Save %

Improved Moxon Vise Hardware Kit with 10" Long 3/4-10 Threaded Rods, 4-1/2" Cast Knobs, Square Nuts, Washer and Bushingss

Taytools
Original price $0.00 - Original price $0.00
Original price $0.00
$48.99
$48.99 - $48.99
Current price $48.99
Out of stock

The Moxon Vise, a twin-screw work-holding fixture with a rich history in furniture shops, was first illustrated by Joseph Moxon in his 17th-century...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$48.99
$48.99 - $48.99
Current price $48.99
Sold out

Taytools Magnetic Bandsaw and Drill Press Fence 18" x 3" (DCE)

Taytools
Original price $139.99 - Original price $139.99
Original price $139.99
$139.99
$139.99 - $139.99
Current price $139.99
Out of stock

Bandsaw Fence Advantages and Features Click here to watch our YouTube video. Advantages: 1) One can be used on any bandsaw with a magnetic ferrous ...

View full details
Original price $139.99 - Original price $139.99
Original price $139.99
$139.99
$139.99 - $139.99
Current price $139.99
Sold out

Dual Edge Laminate veneer Edge Band Trimmer Spring Loaded with Ergonomic Handle Design (DCE)

Taytools
Original price $14.99
Original price $14.99 - Original price $14.99
Original price $14.99
Current price $12.99
$12.99 - $12.99
Current price $12.99
Only 5 left!

This dual edge banding trimmer has 2 doubles sided 30 degree blades it can trim in either direction, and can trim both sides of a board in one pass...

View full details
Original price $14.99
Original price $14.99 - Original price $14.99
Original price $14.99
Current price $12.99
$12.99 - $12.99
Current price $12.99
Save 13% Save %

400/1000 Grit 8" x 3" Diamond Sharpening Stone with Anti-Slip Stone Holder 107202 &107214

Taytools
Original price $32.99 - Original price $32.99
Original price $32.99
$32.99
$32.99 - $32.99
Current price $32.99
Out of stock

Diamonds stones are the hardest and fastest cutting sharpening media available. This diamond stone will cut aggressively and leave a fine finish. I...

View full details
Original price $32.99 - Original price $32.99
Original price $32.99
$32.99
$32.99 - $32.99
Current price $32.99
Sold out

Three sheets 5/16" x 5" x 12" Float Glass for Scary Sharp System

Taytools
Original price $0.00 - Original price $0.00
Original price $0.00
$43.98
$43.98 - $43.98
Current price $43.98
in stock

This is a set of three pieces 5/16" thick x 5" x 12" float glass for use as a flat, hard surface in a the Scary Sharp™ sharpening system. Float gla...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$43.98
$43.98 - $43.98
Current price $43.98

Three sheets 5/16" x 3-1/4" x 8-1/4" Float Glass for Scary Sharp System

Taytools
Original price $0.00 - Original price $0.00
Original price $0.00
$36.28
$36.28 - $36.28
Current price $36.28
in stock

This is a set of three pieces of 5/16" thick x 3-1/4" x 8-1/4" float glass for use as a flat, hard surface in a the Scary Sharp™ sharpening system....

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$36.28
$36.28 - $36.28
Current price $36.28

Abrasive Sanding Belt Cleaner

Taytools
Original price $12.99 - Original price $12.99
Original price $12.99
$12.99
$12.99 - $12.99
Current price $12.99
in stock

This crepe-rubber abrasive cleaner will efficiently remove gum and glue from sanding belts and discs without damage To use, press the belt cleaner...

View full details
Original price $12.99 - Original price $12.99
Original price $12.99
$12.99
$12.99 - $12.99
Current price $12.99

Green Chromium Oxide Micro Fine Stropping Polishing Compound Bars (1.2oz), 0.5 Microns

Taytools
Original price $0.00 - Original price $0.00
Original price $0.00
$6.99 - $26.99
$6.99 - $26.99
Current price $6.99
in stock

This Micro Fine Chromium Oxide polishing compound is specially designed to be used with strops to put a Scary Sharp™, polished, mirror-edge on kniv...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$6.99 - $26.99
$6.99 - $26.99
Current price $6.99

French 2-Sided 3" x 10" Leather Strop with 1.2oz Chromium Oxide 0.5 Micron Polishing Compound Bar

Taytools
Original price $33.99 - Original price $33.99
Original price $33.99
$33.99
$33.99 - $33.99
Current price $33.99
in stock

This is a set containing a French 2-sided leather strop and a 1.2 ounce bar of extra-fine Green Chromium Oxide extra-fine stropping compound. STROP...

View full details
Original price $33.99 - Original price $33.99
Original price $33.99
$33.99
$33.99 - $33.99
Current price $33.99

Deluxe Workbench Holddown Kit with Adjustable Bench Dogs, Vertical Holddowns & 2-3/8" Brass Bench Dogs (DCE)

Taytools
Original price $99.99
Original price $99.99 - Original price $99.99
Original price $99.99
Current price $79.99
$79.99 - $79.99
Current price $79.99
Out of stock

This kit will allow you to secure any size or shape workpiece to the top or side of your workbench anywhere you can drill 3/4" bench dogs.  The kit...

View full details
Original price $99.99
Original price $99.99 - Original price $99.99
Original price $99.99
Current price $79.99
$79.99 - $79.99
Current price $79.99
Sold out

Routing Template and Shim Kit for Magswitch Magjig 150 Switchable Magnets

Taytools
Original price $14.95
Original price $14.95 - Original price $14.95
Original price $14.95
Current price $11.96
$11.96 - $11.96
Current price $11.96
in stock

Magwitch Magjig 150 magnets have innumerable uses in the woodshop. They can be attached to various jigs and fixtures, and with the turn of a knob, ...

View full details
Original price $14.95
Original price $14.95 - Original price $14.95
Original price $14.95
Current price $11.96
$11.96 - $11.96
Current price $11.96
Save 20% Save %

Individual Sets 1-3/16" Low Profile Solid Brass PC-Style Router Template Guide Bushings Sets and Lock Nuts

Taytools
Original price $8.99 - Original price $32.00
Original price $8.99 - Original price $32.00
Original price $8.99
$4.50 - $19.99
$4.50 - $19.99
Current price $4.50
in stock

These solid brass router template guides are used to duplicate parts using a handheld router or router table. They can be installed on any router o...

View full details
Original price $8.99 - Original price $32.00
Original price $8.99 - Original price $32.00
Original price $8.99
$4.50 - $19.99
$4.50 - $19.99
Current price $4.50
Save up to 38% Save %

Low Profile 1/2” Workbench Bench Dogs with 1-1/4” Tall x 4“ Wide Jaw Extensions for 3/4" Dog Holes 8 Pack with Screws

Taytools
Original price $14.99
Original price $14.99 - Original price $14.99
Original price $14.99
Current price $12.99
$12.99 - $12.99
Current price $12.99
in stock

Drop these low-profile bench dogs in any ¾ inch workbench dog holes and push your workpiece against them to stabilize parts and prevent them from m...

View full details
Original price $14.99
Original price $14.99 - Original price $14.99
Original price $14.99
Current price $12.99
$12.99 - $12.99
Current price $12.99
Save 13% Save %

10 Piece Solid Brass Router Template Bushings Guide Bearings Set 464985

Taytools
Original price $27.99 - Original price $27.99
Original price $27.99
$27.99
$27.99 - $27.99
Current price $27.99
in stock

Ten (10) piece router guide template set Precision machined solid brass Contains two (2) lock nuts and OD sizes 5/16", 3/8", 7/16", 1/2", 5/8", 3/...

View full details
Original price $27.99 - Original price $27.99
Original price $27.99
$27.99
$27.99 - $27.99
Current price $27.99

Workbench Leg Vise Screw with 3 TPI Acme Threads 18" Capacity

Taytools
Original price $59.99
Original price $59.99 - Original price $59.99
Original price $59.99
Current price $54.99
$54.99 - $54.99
Current price $54.99
Out of stock

This vise screw will allow you to build a custom workbench vise. The flange and threaded nut and built for durability and made from high strength c...

View full details
Original price $59.99
Original price $59.99 - Original price $59.99
Original price $59.99
Current price $54.99
$54.99 - $54.99
Current price $54.99
Sold out

8 Piece Set Flexible Contour Sanding Grips

Taytools
Original price $11.99
Original price $11.99 - Original price $11.99
Original price $11.99
Current price $9.89
$9.89 - $9.89
Current price $9.89
in stock

This 8 piece set of flexible contour sanding grips makes short work of sanding both concave and convex shapes without distortion of the profile Ju...

View full details
Original price $11.99
Original price $11.99 - Original price $11.99
Original price $11.99
Current price $9.89
$9.89 - $9.89
Current price $9.89
Save 18% Save %

Two sheets 5/16" x 5" x 12" Float Glass for Scary Sharp System

Taytools
Original price $0.00 - Original price $0.00
Original price $0.00
$31.88
$31.88 - $31.88
Current price $31.88
in stock

This is a set of two pieces of 5/16" thick x 5" x 12" float glass for use as a flat, hard surface in a the Scary Sharp™ sharpening system. Float gl...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$31.88
$31.88 - $31.88
Current price $31.88