Titebond III Ultimate Wood Glue

Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever offered that is proven waterproof. The waterproof formula passes the ANSI/HPVA Type I water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. Titebond III is non-toxic, solvent free and cleans up with water - safer to use than traditional waterproof wood glues. It provides strong initial tack, sands easily without softening and is FDA approved for indirect food contact (cutting boards). The ultimate in wood glues - ideal for both interior and exterior applications.

APPLICATION GUIDELINES:

• Application temp above 47°F (10°C)
• Open assembly time: 8-10 minutes (70°F/50%RH)
• Total assembly time: 20-25 minutes (70°F/50%RH)
• Minimum required spread: Approximately 6 mils or 250 square feet per gallon
• Cleans up with water – use a damp cloth while glue is wet. Scrape off and sand dried excess
• Required clamping pressure: enough to bring joints tightly together (generally, 100-150 PSI for softwoods, 125-175 PSI for medium woods, and 175-250 for hardwoods)

LIMITATIONS:

• Not for continuous submersion or for use below the waterline
• Not for structural or load bearing applications
  
• Due to low pH, product may cause corrosion on metal surfaces; test product before using where rusting/corrosion may be a concern
• Storage life 24 months in tightly closed containers below 75°F. Storage above this temperature may cause product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping bottle on a hard surface until product is restored to original form
• To assure optimal bond 45°F is the minimum temperature of the glue, air, and materials during application
• KEEP FROM FREEZING. Can withstand 3-5 freezing cycles. Shake/stir after reaching room temperature to restore to original form
• KEEP OUT OF THE REACH OF CHILDREN

Woodshop and Cabinet Shop Glues Brochure

Titebond III Ultimate Q&A