Brands > Taytools®
Filters
- Abrasives (7)
- Adhesives (2)
- Burnisher (1)
- Carving (7)
- Center Punch (1)
- Chisels (0)
- Clamps (12)
- Compass (1)
- Compass / Caliper / Divider (1)
- Drilling Boring (12)
- Dust Collection (26)
- Gift Card (1)
- Hammer / Mallet (2)
- Hand Planes (15)
- Jig (37)
- Joinery (1)
- Machine Tools (9)
- Marking (15)
- Measuring (26)
- Misc. (2)
- Nail Sets (1)
- Power Tool Accessories (14)
- Replacement (1)
- Saws (3)
- Scrapers (6)
- Screwdrivers (0)
- Sharpening (27)
- Sharpening Stone (2)
- Tape (1)
- Turning Tools (8)
- Veneering (2)
- Vises (9)
- Winding Sticks (1)
- Workshop (15)
10 Piece Female Threaded T Knobs 2" Wide 1" High
Taytools10 each T knobs Threaded through inserts 2" long 1" high 0.750" diameter shoulder Available in the following sizes: 1/4-20, 5/16-18 and 3/8-16 ...
View full details10 Piece Female Threaded T Knobs-1" to 2-1/2" Wide (1.125" high)
Taytools10 each T knobs Threaded through inserts 1.125" high 0.750" diameter shoulder Available in the following sizes: Bolt Size Threads Per Inch Wid...
View full details10 Piece Solid Brass Diamond Knurled Thumb Screw Sets
Taytools10 pack/pieces knurled head solid brass thumb screws with straight shoulders and flat tips The knurled surface on these thumb screws provides opti...
View full details10 Piece Solid Brass Router Template Bushings Guide Bearings Set 464985
TaytoolsTen (10) piece router guide template set Precision machined solid brass Contains two (2) lock nuts and OD sizes 5/16", 3/8", 7/16", 1/2", 5/8", 3/...
View full details10" Hex Shank Auger Forstner Bit Extension for 7/16 Inch Hex Shafts
TaytoolsThis hex shank Auger bit extension will extend the reach of any auger bit sized 13/16” and larger that has a 7/16” hex shank. The overall length is...
View full details10" Round Center Finder Compass for Wood Turners Lathe Work 114601
TaytoolsThis center finder is perfect for laying out bowls, trays and platters Finding the center of irregular shapes to optimize yield is simple and easy...
View full details10" x 4" x 9" Deep ABS Plastic Dust Hood, 4" OD (114899) (DCE)
TaytoolsThese dust hoods can be used to collect dust from a variety of machines or can be placed on a table close to where dust is being produced. Built i...
View full details10-32 x 12" Long Threaded Rod
TaytoolsThis 12" 10-32 threaded rod rod can be combined with any of he Matchfit nuts or knobs to create custom jigs and fixtures. Unfinished steel. WA...
View full details10-Piece Set Nylon Reinforced Spring Clamps with Non-Marring Swivel Pads
TaytoolsThese nylon Spring Clamps are versatile, lightweight making them the perfect clamping solution for the woodworker, hobbyist, crafter or DIY enthusi...
View full details12 Pack Taylor Toolworks Branded Shop Pencils
Taytools12 pack Taylor Toolworks branded shop pencils with erasers in either white or natural finish. Pencil Specifications: Diameter: .295” Lead: .09...
View full details12 Piece MFT Table 20mm Dog Hole Workbench Vertical and 10” Reach Horizontal Holddown Clamp Kit
TaytoolsNote: these clamps work in 20mm dog holes and are too large to fit in 3/4" dog holes. This clamp kit is the ultimate compliment to any MFT table o...
View full details12 Piece MFT Table 20mm Dog Hole Workbench Vertical and 4” Reach Horizontal Holddown Clamp Kit
TaytoolsNote: these clamps work in 20mm dog holes and are too large to fit in 3/4" dog holes. This clamp kit is the ultimate compliment to any MFT table o...
View full details12 Piece Outside Corner Radius Radii Router Template Guides
TaytoolsThese templates allow routing of different sized rounded corners on any workpiece using a bearing guided pattern bit. Layout, cutting and cleanup w...
View full details12" Hardened Steel Protractor Sliding Bevel Gauge (464282)
TaytoolsThis is a high quality, precision, versatile and heavy duty steel protractor. It measures up to 170 degrees in both directions and the head can sli...
View full details123 Block and Brass Gauge Setup Block Machine Kit - 7 Piece Set
TaytoolsUsing setup blocks is nothing new. For decades, machinists have been using setup blocks to set up all types of machines for precision work. Setup b...
View full details129 Piece Jig Fixture T Track Hardware Kit with Knobs, T Bolts, T Nuts, Threaded Inserts
TaytoolsThis 129 piece jig and fixture hardware kit will give you most everything you need to make your own custom clamping and holding jigs. This will sav...
View full details18 Piece Roll Pin Punch Set 466125
TaytoolsTaytools 18 piece Pin Punch Set with 8 each long (8"), 9 each short (4") and automatic center punch set is designed to accurately make holes and dr...
View full details2 each 2.0mm Mechanical Pencils, 12 each HB Leads, Pointer/Sharpener
TaytoolsSet of two (2) mechanical technical drawing pencils with 2.0mm lead. Long-lasting, smooth, and precise retractable mechanical pencil is a perfect ...
View full details2 each T Track Hold Down Clamps 734869
TaytoolsWill work with any T track that accepts 1/4" or 5/16" T bolts Will securely hold stock from 1/4" to 2" thick against your table Will work on drill...
View full details2 Piece 3-3/4" Phenolic Tapered Post Knob Handle
TaytoolsSet of 2 knobs High temperature and impact resistant phenolic construction 3-3/4" long x 1" in diameter Available in three (3) different threading...
View full details2 Piece Expandable Miter Gauge Slot Fixture Hold Down Kit 604003
TaytoolsPerfect accessory for securing hold downs, feather boards or any fixture to any tool with a miter gauge slot Fits all standard 3/4" x 3/8" miter g...
View full details2 Piece Expandable Miter Gauge Slot Hold Down Kit 731035
TaytoolsThis expandable hold down kit is the perfect accessory for securing hold downs, feather boards or any fixture to a table saw, handsaw or router wit...
View full details2 Piece T Track Hold Down Clamp Kit 1/4" x 20 TPI Hex Bolts
TaytoolsThese holds down clamps are perfect when you need to secure work pieces on router table, drill presses or other machines. The included 1/4" x 20 TP...
View full details2" Bowl and Spindle Sander with 10 Discs
TaytoolsThis bowl sander will effortlessly sand pieces mounted on the lathe and avoid sanding marks often encountered when sanding by hand. The 2" diameter...
View full details