ZetSaw Set of 5 Japanese Zet-Saws, Dozuki, Kataba (Rip and Crosscut), Ryoba and Flush Cut

This set of 5 Japanese saws has some of our most popular saws and will allow you to perform a wide range of everyday woodworking applications. Save when buying this cost saving set.

The set has our best-selling saw, a 240 mm Hardwood Dozuki with a spline. The Dozuki has 25 TPI and will make fine and precise cuts for dovetails, tenons and other joinery in hard and soft woods and can rip, crosscut and cut angles equally well. Specs for these saws are below.

The set also contains 2 Kataba saws, one for ripping and the other for crosscutting. These Kataba saws are the perfect saws for general cutting. They have a single cutting edge without a back or spline. Their blades are considerably thicker than those found on the Dozuki back saws. With a thicker blade and no back, these saws are capable of making deep and long cuts in hard and soft woods. These saws have teeth filed for either ripping or crosscutting and will produce clean , fast and deep cuts across and with the grain. Specs for these saws are below.

Also included is a Ryoba saw whioch is the most versatile of the Japanese saws and convenient for both cross and rip cutting. It comes with two sets of teeth - one for rip cuts and one for crosscuts. Specs for these saws are below.

To round out the set included is a thin blade, Japanese flush cut saw perfect for trimming dowels and tenons flush with the surface. The thin flexible blade lets you raise the handle for clearance, while keeping the cutting edge flush with the surface. Zero set keeps the teeth from leaving scratch marks. Specs for these saws are below.

All the above saws have replaceable friction-fit blades with impulse-hardened teeth for exceptional edge retention.

All saws are made in Japan.

07123 Hardwood Dozuki 240 mm/9.44"

Overall length: 535mm/21-1/16"
Blade length: 240 mm/9.44"
Blade thickness: 0.3mm/0.011"
Kerf: 0.4mm/0.015"
Blade depth: 50mm/1-15/16"
Maximum depth of cut: 1-15/16"
Pitch/TPI: 1.2mm/21 TPI
Traditional rattan cane wrapped wood handle
Replacement blade sold separately: 07124

H-265 Crosscut Kataba H-265 265 mm/10.43”

Overall length: 596mm/23.5"
Blade length: 265mm/10.43"
Blade thickness: 0.6mm/0.023"
Kerf: 0.92mm/0.036"
Blade depth: 60.375mm/2.375"
Maximum depth of cut: unlimited
Pitch/TPI: 1.75mm/15 TPI
Handle: Traditional rattan cane wrapped wood handle
Replacement blade sold separately: 15004

H-250 Kataba Rip H-250 250mm/9.84”

Overall length: 581mm/22.875"
Blade length: 250mm/9.84"
Blade thickness: 0.5mm/0.019"
Kerf: 0.7mm/0.027"
Blade depth: 60.3mm/2.375"
Maximum depth of cut: unlimited
Pitch/TPI: Graduated teeth for easier starts and aggressive ripping
Handle: Traditional rattan cane wrapped wood handle
Replacement blade sold separately: 15013

S-250 Double Edge Ryoba 250mm9.84:

Overall length: 600mm/23.62"
Blade length: 250mm/9.84"
Blade thickness: 0.5mm/0.019"
Kerf: 0.7mm/0.027"
Blade depth: 82,5mm/3,25"
Maximum depth of cut: unlimited
Pitch/TPI: Rip: 3.1mm/9 TPI, Crosscut: 1.4mm/18 TPI
Handle: Traditional rattan cane wrapped wood handle
Replacement blade sold separately: 30201

S-145 Flush Cut Saw 150mm/5.9"

Overall length: 298.4mm/11.75"
Blade length: 150 mm/5.9"
Blade thickness: 0.4mm/0.05"
Kerf: 0.4mm/0.015"
Blade depth: 34.9mm/1.375"
Maximum depth of cut: unlimited
Pitch/TPI: 1.2mm/21 TPI
Handle: plastic handle
Come with plastic storage sheath
Replacement blade: 30024

⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov