WoodOwl Deep Cut™ Utility Auger Bits

These bits are designed to easily and quickly bore deep, smooth holes in utility poles, railroad ties, pressure treated limber, wet or frozen wood and other demanding materials. These are the toughest bits made by WoodOwl in terms of overall strength and function, as they can drill through almost any type of wood under any condition. They have a single flute, single cutting head with a single spur (the outer cutting edge that scores the outside of the hole). They cut very cleanly because the spur scores the outside edge of the hole before the cutter head clears material. As they have a spur, they can be damaged if they hit a nail. These bits cut very fast due to the enhanced single flute design and PTFE coating that provides efficient chip ejection. They are hand sharpened which also enhances cutting speed. These bits are not cast or forged but milled and ground from solid round blanks. The sharp lead screws are also precision ground and machined allowing these bits to start immediately into wood once the drill is started. These machining processes produce bits that are perfectly concentric with very little wobble. They drill accurate diameter holes, require less energy to power through wood and create less heat. They will also drill straight and true through all types of wood with minimal wandering. These bits are made from high-carbon S55C steel specially designed for WoodOwl bits. Cutting heads are fully induction hardened from tip to shank. These bits come with PTFE non-stick coating to minimize friction and allow quick and easy cutting and chip ejection in the stickiest of woods. PTFE also protects against corrosion. These bits feature 7/16” quick-change hex shanks. These bits can be used in cordless or corded drills and hand braces. Bits come in plastic storage tubes to protect them when not in use. These bits can be re-sharpened using a WoodOwl feather sharpening file.

⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov