1. Home
  2. Hand Tools
  3. Clamps
  4. Corner Clamps
Corner Box Clamps - Pack of 4

Taytools 4-Pack Corner Box Clamps

SKU of product changed to in carousel content
 $16.99 USD
Now: $16.99 USD
Taytools Logo
These Box Corner Clamps are like having an extra set or two of hands. They ensure your cases, drawers or boxes are square and secure while applying clamps, performing layout, or installing fasteners....More Details
Zoom
Flag Icon
Estimated
$0.00 CAD
Question Mark Icon
Flag Icon
Estimated Total
Includes Duties
Help

These Box Corner Clamps are like having an extra set or two of hands. They ensure your cases, drawers or boxes are square and secure while applying clamps, performing layout, or installing fasteners.

Pressure is applied to the movable wedge head via a 1” star knob. When the knob is tightened, equal pressure is applied to both parts, pulling them into perfect 90-degree alignment. The movable wedge also slides side to side to accommodate parts with varying thicknesses (up to a 5/16” difference). They can accommodate stock from 1/8” to 13/16” thick. These clamps are perfect for butt joints, miters, rabbets, dovetails, box joints, and T-joints. The outside of the clamps have no obstructions, allowing fasteners to be applied with the clamps in place. Joints with protruding pins such as dovetails or box joints are no problem, and they can even be used in the middle of a board when making T-joints. They can be used with pocket hole joints as they prevent joint creep when installing pocket hole screws. They can be placed on the table or bench to clamp from underneath or on top of boxes or both.

They are made from nearly indestructible nylon-reinforced polycarbonate and are sold in sets of four clamps.
    ⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

    Reviews

    4.9 out of 5.0 4.9 stars(7)   Write a review.
    From:MINNESOTA
    5/5
    Even more useful than I expected
    I expected to use these for glue-ups to free up my other clamps while the glue cured. Instead I have found them very handy for several aspects of 2 recent drawer storage builds that I did. What I found is that since these can clamp a corner from inside, I could use them to test dimensions before committing to glue at all. For example I was building a box that would house 2 drawers. The ball-bearing slides that I installed inside the box before gluing it up allowed for only 1/32 inch "play" for the drawer fit. So I temporarily assembled my drawer using 4 of these holding the front of the drawer solidly together while I test fit the back of the drawer. It was ever so slightly too wide. So I disassembled it, trimmed off 1/16 inch of width and re-cut the rabbet on the cut end (I used a locked rabbet for these drawers). Then re-tried the set up and had a perfect fit.
    From:Eugene, OR
    4/5
    Great.
    These will work perfectly for a few upcoming small projects.
    From:MN
    5/5
    Like extra hands to help
    I used these for the first time to help me custom fit drawers for a storage cabinet that I made. The drawer slides only allow for 1/32 inch play, so I needed to be precise for them to fit. I used these on the corners of the drawer sides and front and back to align them before applying glue, because I had to trim a little off. I was using locked rabbet in dados for the assembly. With these on the corners I could sneak up on the fit by testing, then trimming then re-testing.
    From:
    5/5
    Corner box clamps
    They work great. Quick and easy way to tie together boxes and cabinet builds for glue up, brads, etc.
    From:
    5/5
    small jobs
    These clamps work perfectly for what I wanted them for. I build frames for pictures up to 18'x24". I cannot attest to larger jobs or wood wider than 1" because that is what I use them for.
    From:
    5/5
    Really helped a new woodworker
    I purchased the clamps to help with some jewelry boxes I was making. I've only been woodworking with hand tools for a couple of months and these claps really made the job of getting square corners easier. I would highly recommend to anyone pro or novice.
    From:
    5/5
    Great Clamps
    I am currently using these for a build and I love these clamps and they are so affordable. Get them
     
     
    Loading Icon
    Reset
    Close