Taytools 4-Pack Corner Box Clamps

These Box Corner Clamps are like having an extra set or two of hands. They ensure your cases, drawers or boxes are square and secure while applying clamps, performing layout, or installing fasteners.

Pressure is applied to the movable wedge head via a 1” star knob. When the knob is tightened, equal pressure is applied to both parts, pulling them into perfect 90-degree alignment. The movable wedge also slides side to side to accommodate parts with varying thicknesses (up to a 5/16” difference). They can accommodate stock from 1/8” to 13/16” thick. These clamps are perfect for butt joints, miters, rabbets, dovetails, box joints, and T-joints. The outside of the clamps have no obstructions, allowing fasteners to be applied with the clamps in place. Joints with protruding pins such as dovetails or box joints are no problem, and they can even be used in the middle of a board when making T-joints. They can be used with pocket hole joints as they prevent joint creep when installing pocket hole screws. They can be placed on the table or bench to clamp from underneath or on top of boxes or both.

They are made from nearly indestructible nylon-reinforced polycarbonate and are sold in sets of four clamps.

⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov