SuperCut Bandsaw Blades for Wood Cutting High Carbon Steel

These high-performance bandsaw blades are 100% made in the USA and engineered to deliver premium, precision cutting in softwoods, hardwoods, composites, and select non-ferrous metals. They are manufactured from high-grade carbon steel, with teeth hardened to RC 64–66 for excellent wear resistance and long service life.

All welds are backed by a Limited Lifetime Weld Warranty against premature breakage.

Selecting the correct TPI depends on the thickness (cross-section) of the material being cut. For best performance, keep 2 to 10 teeth engaged in the cut at all times.

Blade Width vs. Minimum Cutting Radius (Rule of Thumb)

Blade Width     Minimum Radius
1/8"                   3/16"
3/16"                 5/16"
1/4"                   5/8"
3/8"                   1-1/2"
1/2"                   2-1/2"
5/8"                   4"
3/4"                   5-1/2"

Blades with fewer than 10 TPI feature a hook tooth design, with a forward hook angle (positive rake), deep gullets, and widely spaced teeth. This design delivers fast cutting, excellent chip removal, and aggressive performance.

Blades with 10 TPI and higher typically feature a raker tooth design, with a neutral rake angle and shallower gullets. Cutting is slower and more controlled, producing a smoother finish with less tear-out.

When you’re finished cutting for the day, release the tension on your bandsaw blade.

Bandsaw blades heat up during use and expand slightly. As they cool, they shrink by several thousandths of an inch. If the blade is left under tension while cooling, it can effectively over-tension itself. Over time, the blade can begin to “remember” the shape of the wheels, which may lead to vibration, fatigue, and cracking—especially in the gullets.