These Contemporary Wine stainless steel bottle stoppers feature sleek, modern lines and are favored by experienced makers for their reliable sealing performance and refined design. They are well suited for sealing opened wine bottles (cork or screw-top), balsamic vinegar, oils, and most screw-top liquor bottles, helping preserve freshness while enhancing the appearance of the bottle.
Installation is simple: insert the stopper while gently twisting to create a secure friction fit. The design uses four nitrile O-rings, with two O-rings making full contact inside the bottle neck, providing a tighter seal than tapered stopper designs, which typically allow only one O-ring to contact the bottle interior. The stopper has a 13/16″ top diameter and measures 1-1/4″ tall (excluding the threaded stud).
The clean, modern profile adds elegance to any custom stopper you create, while the flat top provides ample space for custom engraving, making it an excellent choice for wedding gifts, anniversaries, and personalized keepsakes. Handles can be crafted from a wide range of materials, including wood, pottery, polymer clay, ceramics, antique doorknobs, and even golf balls.
These stoppers stand upright on their own, allowing your finished work to be displayed when not in use. The added weight and balanced design make them especially well suited for larger wood tops.
Each stopper is machined from solid 304 (18-8) stainless steel and includes a 3/8″ × 16 TPI threaded stud, 1/2″ long, for a secure connection to your custom-turned handle. When used with a Niles Bottle Stoppers self-tapping mandrel, no threaded insert is required. For most woods, use a 5/16″ stub drill bit; for dense woods, acrylics, or resins, use an 11/32″ stub drill bit.
To use: Insert the stopper by pressing down while gently twisting to achieve a tight seal. Do not push straight down.
To remove: Gently pull upward using a twisting or rocking motion.
Features
Contemporary stainless steel bottle stopper with sleek, modern design
13/16″ top diameter, 1-1/4″ overall length (excluding threaded stud)
Machined from solid 304 (18-8) stainless steel
Four nitrile O-rings, with two making contact inside the bottle neck
3/8″ × 16 TPI × 1/2″ long threaded stud for custom handles
Compatible with Niles Bottle Stoppers self-tapping mandrels
