3M™ 775L Sanding Discs Cubitron II ™ Stikit™ PSA Pressure Sensitive Adhesive No Holes with Tab 3 Mil Film Backing
3M™ Cubitron™ II Stikit™ Film Discs feature 3M™ proprietary Precision Shaped Ceramic Grain, a revolutionary advancement in abrasive technology. The sharp, triangular shaped ceramic mineral is designed to slice through the substrate, rather than gouging or “plowing” like conventional abrasives, resulting in a disc that cuts up to 2x as fast and lasts up to 6x as long as conventional abrasives.
These discs are ideal for a broad range of applications focused primarily on stock removal, and are effective on a wide variety of substrates, including metals, composites, gelcoat, and wood. The 3 mil film backing offers greater tear resistance than paper discs for additional durability and edge retention.
The 3M™ Stikit™ system eliminates the time-consuming task of applying adhesive to the disc backing. These high-quality, coated abrasive products come ready to use with a pressure sensitive adhesive coating on the backside so that attaching them to your disc pad is as simple as pressing on a sticker. And because the adhesive is pressure sensitive, the disc can be peeled off of the disc pad just as easily, leaving a clean surface for your next disc. A Stikit™ disc must be pressed onto a Stikit™ backup pad (also called a disc pad and sold separately) that is attached to a disc sander, random orbital sander, or stationary disc sander.
What makes 3M ™ Cubitrom II ™ abrasives so special??
Cubitron II ™ premium abrasives are powered by 3M ™ Precision-Shaped Grain (PSG) Technology — the result of decades of technological advances in ceramic abrasive and microreplication technologies. These precision-shaped grains are uniformly sized triangular structures that are super-sharp and evenly distributed onto the film backing, allowing them to slice through material. These grains are electrostatically oriented on the backing for the most efficient cut and even wear. As the triangular shaped grain wears, the cutting edge continuously fractures to form new, sharp points and edges that continue to slice through material, wear evenly, provide super-long life and produce a consistent finish. This allows 3M Cubitron II ™ belts and discs to run cooler and keep on working—long after conventional abrasives have dulled, shelled, glazed over and been thrown out. Conventional abrasives tend to be irregular and blocky in shape. Instead of a clean, machining action, conventional grain tends to “plow” through material, causing heat to build up both in the workpiece and the abrasive — resulting in a slower cut, shorter abrasive life and a lower quality finish. Cubitron II ™ abrasives are available resin-bonded to a stiff, super-tough 3 mil film backing that offers greater tear resistance than paper discs providing greater durability, edge retention and finish quality. Cubitron II ™ discs and belts lasts significantly longer than conventional abrasive allowing more parts to be sanded per disc with fewer disc changes.
Safety Data Sheets
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety standards (e.g., U.S. OSHA), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov