Narex 4-Piece Butt Chisel Sets

These butt chisels are made by Narex of the Czech Republic and are of exceptional quality. The blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to 59 HRc. The blades take and hold an excellent edge. The blades are accurately ground and the sides are ground at a sharp bevel ending to a very narrow landing on each side, providing excellent sidewall clearance. They are ground at a 25 degree bevel. Blades are a full 1/4" thick toward the handle adding strength and making them easier to control. Handles are stained European Beech with a flat on the back to prevent rolling off the bench. Blades have well-seated heavy steel tangs and handles solid brass ferrules to withstand vigorous mallet work.

KIT0507 Includes:

Component	Blade Width
883425	1"
883413	1/2"
883407	1/4"
883403	1/8"
883419	3/4"
883409	3/8"

863010 Includes:

Component	Blade Width
810106	6mm
810112	12mm
810120	20mm
810126	26mm

863110 Includes:

Component	Blade Width
810108	8mm
810110	10mm
810116	16mm
810132	32mm

KIT0002 Includes:

Component	Blade Width
810103	3mm
810104	4mm
810106	6mm
810108	8mm
810110	10mm
810112	12mm
810116	16mm
810120	20mm
810126	26mm
810132	32mm
810140	40mm
810150	50mm

KIT0027 Includes:

Component	Blade Width
810106	6mm
810108	8mm
810110	10mm
810112	12mm
810116	16mm
810120	20mm
810126	26mm
810132	32mm

853600 Includes:

Component	Blade Width
815025	1"
815013	1/2"
815007	1/4"
815019	3/4"
815009	3/8"

KIT2037 Includes:

Component	Blade Width
815075	1"
815063	1/2"
815057	1/4"
815053	1/8"
815069	3/4"
815059	3/8"

853750 Includes:

Component	Blade Width
811056	6mm
811062	12mm
811070	20mm
811076	26mm

KIT0322 Includes:

Component	Blade Width
811056	6mm
811062	12mm
811070	20mm
811076	26mm

⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov