Microjig GR-200_DVC-850AP

The Adjustable Spacer gives you 54% more gripping area for controlling larger material. Fully adjustable. Use it as a router table guide for bullnose routing and eliminating snipe from your full-profile cuts.

MATCHFIT Dovetail Clamp AP With X-PAD Attachment 

Route a dovetail groove and clamp like never before with MATCHFIT Dovetail Clamps.

The breakthrough dovetail clamp arm design gives you the freedom to create your own track grooves using a dovetail router bit to clamp virtually anywhere.

Create clamping tracks virtually anywhere by routing dovetail grooves.

Exert versatile clamping pressure without interfering with the operation by containing the MATCHFIT Dovetail Clamp head arm within the dovetail groove. It expands creative freedom to build extension fences, tables, workspaces, and personalized track systems.

Designed for creativity, engineered to work smarter.

• Clamping Range: 0 – 8.5" (0 – 215.9mm)
• Clamp Pressure: 595 lbs open at 4" (270 kg open at 100mm)
• Jaw Depth: 2.375" (60mm)
• Minimum Dovetail Slot Length: 3.75" (95mm)
• Dovetail Profile: 0.5" by 14º

The ultimate track clamp

Create your own clamp tracks anywhere you can route a dovetail groove. Enjoy the same, limitless functionality as the standard Dovetail Clamps with three added benefits:

Anti-Pivot technology keeps the clamp arm in place to make repetitive tasks faster.
Included X-PAD applies force in two directions and helps you secure material with fewer clamps.
Increased clamping range (to 8.5")

Work faster with a clamp arm that won't drop.

The Anti-Pivot Coil Spring prevents the clamp arm from pivoting and dropping when switching workpieces in repetitive processes. Save time and work faster without having to reset your clamp height for every part.

Use any standard 1/2"-14° dovetail router bit to router your own tracks virtually anywhere. Clamp without limits, and never buy expensive T-track again.

Clamp in two directions with a single clamp.

The included X-PAD simultaneously applies hold-down and in-line pressure as the clamp tightens. The combined forces keep your workpieces flat and eliminate the need for two or more different clamps.

The V-groove profile gives you two points of contact to clamp round or oblong stock with ease.

Build jigs like never before.

The MATCHFIT dovetail track system allows you to create your own tracks with just a router bit. It's like an infinite supply of T-track without the cost of T-track.

Create your own clamp tracks anywhere you can route.

Simply route a groove anywehre you need using a 1/2"- 14° dovetail router bit.

Secure material with ZERO interference.

The Dovetail Clamp AP slides below the surface, so you can secure material without the clamp getting in the way.

Use a spacer to secure material from a distance.

A spacer provides in-line pressure--leaving the top of the material unobstructed for sanding, flattening, template routing or CNC work.

Clamp round stock with ease.

Turn the X-PAD 90° to clamp round and oblong-profile stock with a single clamp.