The GRR-RIPPER® 3D Pushblock is engineered to give you the most accurate cuts possible while protecting your hands at all times. No other pushblock offers this level of precision, control, and safety. Make difficult cuts with ease, and prevent kickback like never before. How it works. Three directions of force.
Three directions of force provide essential stability for superior precision, safety, and control.
Downward pressure stabilizes work piece on a flat surface Inward pressure against the fence virtually eliminates kickback Forward pressure feeds stock consistently through the cut to eliminate burning and blade marks. Virtually eliminates kickback on table saws.
Kickback occurs when the workpiece strays from the fence, and gets pinched between the saw blade and the fence. The rear teeth of the blade grab the workpiece, turning it into a dangerous projectile. The only way to avoid kickback is to maintain control of your workpiece through the entire cut.
The GRR-RIPPER® provides downward and inward pressure, keeping both sides of the cut parallel to the blade. This prevents the workpiece from straying from the rip fence, virtually eliminating kickback.
Rip without stopping and burning.
Over 30+ uses on table saws, router tables, jointers, and band saws. Table Saws
The GRR-RIPPER was built for the table saw. It acts as a moving blade guard, shielding your hands from the saw blade through the entire cut. Right out of the box, the GRR-RIPPER can cut stock down to ?” x ?”. Because it provides 3 directions of control, your cuts will be cleaner and more precise. Router Tables
The GRR-RIPPER provides incredible command over your workpiece on the router table. Whether you’re using the fence or freehand routing, its powerful grip controls stock and protects your hands from dangerous spinning bits. Jointers
The GRR-RIPPER’s proprietary Green GRR-RIP material provides all the traction you need to properly flatten stock on the jointer. Because of its powerful grip, you can feed material over the cutter head without having to apply too much downward pressure. The GRR-RIPPER makes proper face-jointing technique easy, and safe. Band Saws
The GRR-RIPPER's legs and main body maintain a constant 90 degree angle. It can be used on its side which is ideal for resawing on bandsaws. The GRR-RIPPER glides along the table top and applies even pressure against the fence with your hands clear of the blade. Even pressure means less blade drift, resulting in smoother cuts. Features. Fully Adjustable
Center Leg. Adjusts to varying material widths, allowing you to control both the keeper and off-cut sides of your workpiece through the entire cut. Balance Support. Adjusts to match material thickness, keeping the GRR-RIPPER® upright and square. Ultimate gripping power
GREEN GRR-RIP® gives you incredible traction for easy handling of hardwoods, composites, plastics and aluminum. Its treaded surface conforms to the workpiece for superior control. Dust and buildup easily wipes off with denatured alcohol. The additional 1" of GREEN GRR-RIP® on the Adjustable Spacer provides even more traction for ADVANCED control.
Dimensions:
6.25 x 8.25 x 2.5
RR-RIPPER Deflector / Connector
GRR-RIP BLOCK Accessory for additional chip deflection and lose debris protection,
Use it to connect two GRR-RIP BLOCKs for handling larger material.
Easily attaches to top mount brass inserts on the GRR-RIP BLOCK
Note: GRR-RIP BLOCK not included in this sale.
GRR-RIPPER Gravity Heel Kit Accessory
Support your workpiece and prevent tearout
The Gravity Heel Kit includes 5 dynamic heels that auto retract mid-board, and drop down to hook the tail end of the workpiece. The specially formulated plastic material allows them to be cut, providing support to prevent tearout at the end of the cut.
Consistent feed and pressure end to end
Attaches to the GRR-RIPPER® with included mounting hardware. Auto retracts mid-board when working with long stock, drops down to hook the tail end of the workpiece. Serves as a sacrificial backer to prevent tearout.
Router bit support
On the router table, the bit’s profile is templated into the Gravity Heel, providing support around the profile being cut.
Adjustable down to 1”
Includes 5 Gravity Heels and mounting hardware. Replacement Heels are available in packs of 5 (without hardware).
We understand you're busy and that some things you order may not work out. That's why we give you 90 days to return any unused items. These items must be new, unwashed, and in resalable condition with all manufacturer's tags still attached.
All orders over $55 ship for FREE (contiguous U.S. only). Our shipping team takes pride in getting your order out the door as quickly as possible. Most orders placed before 3PM CST will ship out the same business day.
