Microjig GR-100_DVC-850AP

GRR-Ripper 3D Push Block

Protect hands and prevent kickback.

The GRR-RIPPER® 3D Pushblock is engineered to give you the most accurate cuts possible while protecting your hands at all times. No other pushblock offers this level of precision, control, and safety. Make difficult cuts with ease, and prevent kickback like never before.
How it works.

Three directions of force.

Three directions of force provide essential stability for superior precision, safety, and control.

• Downward pressure stabilizes work piece on a flat surface
• Inward pressure against the fence virtually eliminates kickback
• Forward pressure feeds stock consistently through the cut to eliminate burning and blade marks.

Virtually eliminates kickback on table saws.

Kickback occurs when the workpiece strays from the fence, and gets pinched between the saw blade and the fence. The rear teeth of the blade grab the workpiece, turning it into a dangerous projectile. The only way to avoid kickback is to maintain control of your workpiece through the entire cut.

Rip without stopping and burning.

Over 30+ uses on table saws, router tables, jointers, and band saws.
Table Saws

The GRR-RIPPER was built for the table saw. It acts as a moving blade guard, shielding your hands from the saw blade through the entire cut. Right out of the box, the GRR-RIPPER can cut stock down to ?” x ?”. Because it provides 3 directions of control, your cuts will be cleaner and more precise.
Router Tables

The GRR-RIPPER provides incredible command over your workpiece on the router table. Whether you’re using the fence or freehand routing, its powerful grip controls stock and protects your hands from dangerous spinning bits.
Jointers

The GRR-RIPPER’s proprietary Green GRR-RIP material provides all the traction you need to properly flatten stock on the jointer. Because of its powerful grip, you can feed material over the cutter head without having to apply too much downward pressure. The GRR-RIPPER makes proper face-jointing technique easy, and safe.
Band Saws

The GRR-RIPPER's legs and main body maintain a constant 90 degree angle. It can be used on its side which is ideal for resawing on bandsaws. The GRR-RIPPER glides along the table top and applies even pressure against the fence with your hands clear of the blade. Even pressure means less blade drift, resulting in smoother cuts.
Features.
Fully Adjustable

Center Leg. Adjusts to varying material widths, allowing you to control both the keeper and off-cut sides of your workpiece through the entire cut.
Balance Support. Adjusts to match material thickness, keeping the GRR-RIPPER® upright and square.

Ultimate gripping power

GREEN GRR-RIP® gives you incredible traction for easy handling of hardwoods, composites, plastics and aluminum. Its treaded surface conforms to the workpiece for superior control.
Dust and buildup easily wipes off with denatured alcohol. The additional 1" of GREEN GRR-RIP® on the Adjustable Spacer provides even more traction for ADVANCED control.

Dimensions:

6.25 x 8.25 x 2.5

MATCHFIT Dovetail Clamp AP With X-PAD Attachment

Route a dovetail groove and clamp like never before with MATCHFIT Dovetail Clamps.

The breakthrough dovetail clamp arm design gives you the freedom to create your own track grooves using a dovetail router bit to clamp virtually anywhere.

Create clamping tracks virtually anywhere by routing dovetail grooves.

Exert versatile clamping pressure without interfering with the operation by containing the MATCHFIT Dovetail Clamp head arm within the dovetail groove. It expands creative freedom to build extension fences, tables, workspaces, and personalized track systems.

Designed for creativity, engineered to work smarter.

• Clamping Range: 0 – 8.5" (0 – 215.9mm)
• Clamp Pressure: 595 lbs open at 4" (270 kg open at 100mm)
• Jaw Depth: 2.375" (60mm)
• Minimum Dovetail Slot Length: 3.75" (95mm)
• Dovetail Profile: 0.5" by 14º

The ultimate track clamp

Create your own clamp tracks anywhere you can route a dovetail groove. Enjoy the same, limitless functionality as the standard Dovetail Clamps with three added benefits:

    1. Anti-Pivot technology keeps the clamp arm in place to make repetitive tasks faster.
    2. Included X-PAD applies force in two directions and helps you secure material with fewer clamps.
    3. Increased clamping range (to 8.5")

Work faster with a clamp arm that won't drop.

The Anti-Pivot Coil Spring prevents the clamp arm from pivoting and dropping when switching workpieces in repetitive processes. Save time and work faster without having to reset your clamp height for every part.

Use any standard 1/2"-14° dovetail router bit to router your own tracks virtually anywhere. Clamp without limits, and never buy expensive T-track again.

Clamp in two directions with a single clamp.

The included X-PAD simultaneously applies hold-down and in-line pressure as the clamp tightens. The combined forces keep your workpieces flat and eliminate the need for two or more different clamps.

The V-groove profile gives you two points of contact to clamp round or oblong stock with ease.

Build jigs like never before.

The MATCHFIT dovetail track system allows you to create your own tracks with just a router bit. It's like an infinite supply of T-track without the cost of T-track.

Create your own clamp tracks anywhere you can route.

Simply route a groove anywehre you need using a 1/2"- 14° dovetail router bit.

Secure material with ZERO interference.

The Dovetail Clamp AP slides below the surface, so you can secure material without the clamp getting in the way.

Use a spacer to secure material from a distance.

A spacer provides in-line pressure--leaving the top of the material unobstructed for sanding, flattening, template routing or CNC work.

Clamp round stock with ease.

Turn the X-PAD 90° to clamp round and oblong-profile stock with a single clamp.