Benchdog Tools Parallel Guide System - Mafell / Bosch GKT FSN tracks

The parallel guide system is designed to be easily connected to both Mafell and Bosch Tracks, making it a highly versatile option.

The process of connecting it is straightforward and simple: simply slide the system into place and tighten the thumbscrews. Once in place, set your stop, and you're ready to get started with your project.

Scroll down to the demonstration video below on how to use the Mafell / Bosch Parallel Guide System.

Available in Metric or Imperial

330 Sections can achieve cuts of the following:

• Section 1 - 500mmWith Sections 1 & 2 - 830mm
• With All Sections - 1160mm

You will receive:

• 2 x Parallel Guide Track adaptors 
• 6x 330mm Extrusions (Available in Metric or Imperial)
• 2 x Aluminium Stops
• 4x M5x8 Stainless Steel Thumbscrews
• 4 x Connector Blocks
• 2x M5 Washers
• 2x M5 T-Nuts
• 6 x or 4 x Joining Bars to suit your chosen option
• 1 x 2mm Hex Key
• 1 x 2.5mm Hex Key
• 1 x 3mm Hex Key
• 4 x M5 X 10 Countersunk Hex Screws
• 1 x Components Tin

All markings on the tracks are laser-engraved.

Calibration can easily be achieved by loosening 2 screws and moving to your cut line's desired measurement.

PLEASE NOTE THIS PRODUCT IS NOW COMPATIBLE WITH BOSCH GKT PLUNGE SAWS 

Proudly made in Britain by Benchdog Tools 🇬🇧