Benchdog Imperial CSC SYS Fence Kit – Precision Cross-Cut System with Flip Stops
If you own a Festool CSC SYS Table Saw, you know how challenging it can be to achieve accurate and repeatable cross-cuts.
The Benchdog CSC SYS Fence Kit solves that problem with a precision-machined aluminum adaptor plate that allows you to securely attach Benchdog CSC Fences to your saw for flawless accuracy and consistency.
Each fence features laser-engraved scale markings set at 1/16” intervals and offset 1/16” from the blade for safe, accurate referencing. With fence lengths available in 330 mm (12.99"), 625 mm (24.61"), and 990 mm (38.98"), you can customize your setup for any project.
The 625 mm (24.61") and 990 mm (38.98") kits include a material support plate with a dial-in thumbscrew for perfect workpiece alignment.
Made from anodized aerospace-grade aluminum, this kit reflects Benchdog
Tools’ commitment to producing precision woodworking tools built to
last.
Key Features:- Designed for the Festool CSC SYS Table Saw
- Enables accurate, repeatable cross-cuts
- Includes marked fences with laser scale and flag stops
- Compatible with multiple fence lengths: 330 mm (12.99") / 625 mm (24.61") / 990 mm (38.98")
- Includes a material support plate and guard lifter
- Precision-machined anodized aluminum adaptor plate
- Proudly made in Britain
Kit Options:
330 mm (12.99") Fence Kit- 1 × Machined Aluminum Adaptor Plate (Anodized Black)
- 1 × Fence 330 mm (12.99")
- 1 × Flag Stop (Red, Green, or Blue)
- 1 × 3D-Printed Guard Lifter
- 2 × Stainless Steel Thumbscrews
- 2 × M6 T-Nuts
- 1 × M6 × 25 Thumbscrew
- 1 × M6 Calibration Screw with M6 T-Nut
625 mm (24.61") Fence Kit- 1 × Machined Aluminum Adaptor Plate (Anodized Black)
- 1 × Fence 625 mm (24.61")
- 1 × Flag Stop (Red, Green, or Blue)
- 1 × 3D-Printed Guard Lifter
- 2 × Stainless Steel Thumbscrews
- 2 × M6 T-Nuts
- 1 × Material Support Plate with Fixings
- 1 × M6 × 25 Thumbscrew
- 1 × M6 Calibration Screw with M6 T-Nut
990 mm (38.98") Fence Kit- 1 × Machined Aluminum Adaptor Plate (Anodized Black)
- 3 × Fence Sections, each 330 mm (12.99")
- 1 × Flag Stop (Red, Green, or Blue)
- 1 × 3D-Printed Guard Lifter
- 2 × Stainless Steel Thumbscrews
- 2 × M6 T-Nuts
- 1 × Material Support Plate with Fixings
- 1 × M6 × 25 Thumbscrew
- 6 × Joining Bars & Hex Key
- 1 × M6 Calibration Screw with M6 T-NUT
990 mm (38.98") Fence SYS Kit
- 1 × Machined Aluminum Adaptor Plate (Anodized Black)
- 1 × Fence 990 mm (38.98") (supplied as 3 × 330 mm sections)
- 3 × Flag Stops (Red, Green
- 1 × 3D-Printed Guard Lifter
- 2 × Stainless Steel Thumbscrews
- 2 × M6 T-Nuts
- 1 × Material Support Plate with Fixings
- 6 × Joiners
- 1 × M6 × 25 Thumbscrew
- 1 × Tanos M112 with Foam Insert
- 1 × M6 Calibration Screw with M6 T-Nut
- The 1 mm (0.04") Setup Block shown in the demonstration video is not included and is sold separately.
- Minimum blade height for guard-lift operation: 36 mm (1.42")
⚠️
Safety Warning – CSC Fence System ⚠️
When using fences longer than 625 mm (24.61"), there is an increased risk of saw tipping.
To ensure safe operation:
• Always secure your saw firmly before use
• Operate on a flat, stable surface
• Support long workpieces with additional stands
• Keep fences aligned and locked in position
• Avoid excessive side pressure during cutting
Failure to follow these guidelines may cause instability or reduced cutting accuracy.
Recommended Accessories- 1 mm (0.04") Setup Block
- Benchdog Flag Stops
Proudly made in Britain by Benchdog Tools
