3M™ Individual Sheets Diamond Lapping / Microfinishing Film PSA

3M Individual Sheets Diamond Lapping / Microfinishing Film PSA

SKU of product changed to in carousel content
 $13.99 USD $24.99 USD
$13.99 USD$24.99 USD
 Logo
These 3M™ diamond microfinishing lapping sheets were developed for the electronic industry but are the perfect solution to flat lapping, polishing or sharpening just about anything. These diamond s...More Details
Zoom
Flag Icon
Estimated
$0.00 CAD
Question Mark Icon
xGrit:xSize:xLength:xWidth:Clear All
SKUPrice
1495-3x80.1 Micron (200000 Grit)3" x 8"83$13.99 USD
1495-3x810+ Available$13.99 USD/ea
$17.99 USD
1463-3x80.5 Micron (50000 Grit)3" x 8"83$13.99 USD
1463-3x810+ Available$13.99 USD/ea
$17.99 USD
4913-3x81 Micron (25000 Grit)3" x 8"83$13.99 USD
4913-3x810+ Available$13.99 USD/ea
$17.99 USD
4737-3x8125 Micron (120 Grit)3" x 8"83$13.99 USD
4737-3x810+ Available$13.99 USD/ea
$17.99 USD
8919-3x83 Micron (7000 Grit)3" x 8"83$13.99 USD
8919-3x810+ Available$13.99 USD/ea
$17.99 USD
8925-3x86 Micron (3200 Grit)3" x 8"83$13.99 USD
8925-3x810+ Available$13.99 USD/ea
$17.99 USD
560299 Micron (2000 Grit)3" x 8"83$13.99 USD
5602910+ Available$13.99 USD/ea
$17.99 USD
5603015 Micron (1250 Grit)3" x 8"83$13.99 USD
5603010+ Available$13.99 USD/ea
$17.99 USD
5603130 Micron (600 Grit)3" x 8"83$13.99 USD
5603110+ Available$13.99 USD/ea
$17.99 USD
4737-4x10125 Micron (120 Grit)4" x 10"104$24.99 USD
4737-4x101 Available$24.99 USD/ea
$28.99 USD
5318-3x845 Micron (400 Grit)3" x 8"83$13.99 USD
5318-3x810+ Available$13.99 USD/ea
$17.99 USD
4736-3x874 Micron (220 Grit)3" x 8"83$13.99 USD
4736-3x810+ Available$13.99 USD/ea
$17.99 USD
No Matching SKUs.

These 3M™ diamond microfinishing lapping sheets were developed for the electronic industry but are the perfect solution to flat lapping, polishing or sharpening just about anything. These diamond sheets contain carefully graded monocrystalline diamond particles electrostatically coated onto a high strength polyester film backing. This super-fast cutting, long-lasting, water resistant abrasive provides precise, consistent, close tolerance finishes, but really excel when used on harder materials such as hardened steel, carbide or gemstones. This diamond film is the most aggressive polishing or sharpening media available and will cut up to twice as fast as aluminum oxide or silicon carbide films. The diamond particles have superior fracture resistance and will outlast other lapping and sharpening media by up to two times. They are available in a wide range of precise micron grades from 0.1 micron (200,000 grit) to 125 micron (120 grit) to meet any sharpening or polishing need. They can be affixed to a hard, flat surface (usually thick float glass) and used to get a Scary Sharp™ edge on wood chisels or plane irons. They can be wrapped around contoured sticks and used to sharpen carving tools. They can put a wicked sharp edge on all kinds of knives. They can be used to sharpen carbide cutting tools. They can also be used to put a fine polish on jewelry or gemstones. These sheets are PSA (Pressure Sensitive Adhesive) backed. Grades from 0.1 to 30 micron have a 3 mil backing and grades 45 to 125 have a much thicker 5 mil backing. The high-strength polyester film backing is less likely to tear than traditional wet or dry sandpaper. When affixing to a substrate make sure to fully clean the surface as any debris will create a bump and expose the film to being sliced. They can be used dry but using wet with water or light oil as a lubricant to carry away the swarf is preferred as this minimizes loading and prolongs the life of the abrasive.
    ⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
     
     
    Loading Icon
    Reset
    Close