Easy Wood Tools Set of 3 Negative Rake Carbide Cutters (Ci2-R2-NR, Ci3-NR, Ci7-NR)

This is a set of 3 authentic, made in the USA, Easy Wood Tools negative rake carbide cutters. Negative rake cutters work well with man-made acrylics, hard exotic woods, and end grains, resulting in a better finish with less "grabs" as well as better edge life. Comes with a 10-compartment storage container to store and protect replacement cutters when not in use. The compartments are 1" x 1" x 5/6" in size. Also includes replacement screws. Set includes the following cutters:

Easy Wood Tools cutters have the optimal three G’s of Carbide: Grade, Grind, and Geometry. Only when these are in harmony will you have a cutting edge for high performance woodturning.

• Grade: Carbide is basically a mixture of tungsten powder and cobalt that is fused together under high pressure and heat. The ratio of cobalt to tungsten and the size of the tungsten particle are referred to collectively as the grade. There are literally hundreds of thousands of conceivable grades and no one grade of carbide is suitable for all applications – whether wood cutting or metal cutting. The perfect combination of cobalt and grain size in EWT cutters yield a cutting edge that is both the keenest and most durable grade for woodturning available with today’s carbide technology.
• Grind: Easy Wood Tools grinds all their cutters on super rigid CNC grinders to prevent micro chipping of the cutting edges. The proper grit diamond wheels are used to produce the flattest, truest surfaces possible with minimal grinding scratches left on the surface. All cutter surfaces are ground in the optimum sequence to bring the edge into keenness during the very last process.
• Geometry: Easy Wood Tools grinds all their cutters to correct angles and geometries specifically for woodturning. This produces an edge that cuts both cleanly and safely for all skill levels.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov