Disclaimer: 

Actual shipping charges apply. Due to SawStop policy, Taylor Toolworks cannot ship SawStop products outside the Contiguous U.S. Any SawStop order that we ship requires a U.S. shipping address.

*An additional $200.00 shipping markup will be applied to this product*

*Please call (573) 397-6432 for pickup orders*

*No discount codes are eligible to be used with this product*

--

The SawStop® Jobsite Saw (JSS) Pro delivers durability, innovation and precision with a design that’s built for the worksite, garage or for working outside. This saw is percect for the contractor and trade professional that needs a safe and portable table saw out in the field and for space constrained home users that want to operate a saw in a small footprint and store it in an even smaller footprint.   

Features:

SawStop’s Patented Safety System: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.

Large Table: 24-5/8” table depth allows a larger working surface for safe and accurate cuts with less tipping of materials

One-Turn Blade Elevation: The 10” blade can be fully raised or lowered with just one turn of the handwheel. Other saws require over 25 turns to raise/ lower the blade.

Quick-Tilt Blade Angle and Micro Adjust Blade Angle:: Tilt the blade quickly to any desired angle in one-degree increments. Fine tune blade tilt with the infinitely adjustable micro adjust feature.

High-Lo T-Style Fence with ErgoLock: Dual height Hi-Lo T-style fence allows sale and accurate cutting of thin or thicker material. Jobsite T-Glide Fence slides smoothly and locks firm in place with one touch of the ErgoLock. T-style design minimizes fence deflection improving accuracy. 

Table Extension Clamp: Extend the OnDemand shelf when extra support is needed. allowing you to quickly extend the table to a full 25-1/2'' rip capacity.

Fence Storage: store the fence in the convenient side brackets right on the side of the saw.

Low-Profile Blade Guard: The Low-Profile Micro Guard increases visibility and protects against kickback with less interference than other guards. Quickly switch between the Micro Guard and the provided riving knife with the flip of a lever.

Folding/Mobile Cart:
Pedal activated folding stand allows collapsing the saw the transporting to right where you need it. Large 8'' wheels make it easy to transport up/down inclines and over obstacles found on most jobsites. Can easily store the saw in its folded position and then move into position for quick set up.

Control Box:
Large power Start/Stop paddle with lights to communicate system status. Can use the control box to bypass safety system when needed.  On-board computer constantly checks that all systems are working to keep you safe.

Tool-Free Zero-Clearance Insert

Onboard Storage: Keep the accessories contained and protected in the onboard storage drawer. Store and protect the Active Dust Collection Guard, riving knife, miter gauge and more, all ready for quick use.

Efficient dust collection:  Dual dust ports are located in the blade guard and below the blade capturing dust at the source. 

What's Included: 

• SawStop 10'' Jobsite Saw PRO
• Collapsible rolling cart
• Miter gauge
• JSS Micro Blade Guard
• Riving knife
• Two Blade wrenches
• Push stick
• 10'' Blade
• Standard brake cartridge
• User's guide
• Hardware pack
• Set of hex keys

Specifications:

• Motor: 120V AC, 60 HZ, Universal, 15 Amp
• Motor Peak HP: 4
• Amperage” 15 amps
• Motor Continuous HP: 1-1/2
• No Load RPM: 4,000
• Table Dimensions (retracted): 31-1/4" x 24-5/8"
• Table Dimensions (extended) 43-5/16” x 24-5/8”
• Rip Capacity Right of Blade: 25-1/2"
• Rip Capacity Left of Blade: 9-3/4”
• Arbor Diameter: 5/8”
• Blade Diameter: 10"
• Dado Diameter: 8"
• Maximum Dado Thickness: 28/32”
• Riving Knife Thickness: 2.3mm (.090”)
• Maximum. Depth of Cut at 0°: 3-1/8"
• Maximum. Depth of Cut at 45°: 2-1/8"
• Bevel Angle Range: -1°-46°
• Blade Tilt: Left
• Table in front of blade: 7-7/8”
• Table behind blade: 7-3/8”
• Blade Guard Dust Port Diameter (ID): 1-3/8'' (OD): 1-11/16''
• Lower Dust Port Diameter (ID): 2-1/4'' (OD): 2-9/16''
• Size (when setup): 48" L x 29" W x 36" H
• Size (collapsed): 26-1/2" L x 29" W x 45" H
• Weight (with cart): 113 lb
• Weight (without cart): 84 lb
• Shipping Weight: 137.08 lb

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov