Skip to content

Microjig MF-1004 Matchfit Dado Stop Pro Kit and FitFinder FN12 1/2 Gauge Center Finder

Save 19% Save 19%
Original price $93.99
Original price $93.99 - Original price $93.99
Original price $93.99
Current price $76.49
$76.49 - $76.49
Current price $76.49
SKU MF-1004_FN12

Bundle includes the Microjig (MF-1004) Dado Stop Pro & FitFinder FN12 1/2 Gauge Center Finder

Dado Stop Pro NF-1004

What’s In The Box?

  • (1) MATCHFIT Dado Stop
  • (1) MATCHFIT Dovetail Clamp
  • (1) MATCHFIT Setup Gauge
  • (1) Illustrated Instructions

Will produce perfect-fitting dados on any table saw or router.

Now, your inlay is a perfect fit. It’s that simple.

Insert the inlay material into your workpiece, for a perfect-fitting dado.

Use the Dado Stop as a crosscut stop.

The Dado Stop can be used as a safe and effective crosscut stop. The precise 3” length allows you to accurately set the rip fence scale for repeatable, accurate cuts, fast.

Perfectly-fitted dados, joinery, and inlays without measuring, marking, or test cuts.

Simple and easy to use, the MATCHFIT Dado Stop sets the shoulders of your cross dado using the actual part that will be fitted in the dado for a perfect fit without measuring or test cuts. No hassles, no tricky measurements, just perfect-fitting dado cuts.

Using the legs as a stop, make your start and finish shoulder cuts.

  1. Use Leg #1 to cut your first shoulder.
  2. Use Leg #3 to cut your second shoulder.
  3. Clear the center.

FitFinder 1/2 Gauge Center Finder FN12

Find 1/2 thickness of material in seconds.

The FITFINDER 1/2 Gauge allows you to find the 1/2 thickness of any material up to 3" thick. Create perfectly fitting joints with zero guesswork, set fences and transfer cutting depths instantly--all with no math or measuring.

No math or measuring required.

The FITFINDER 1/2 Gauge automatically finds the center of your workpiece using simple geometry. Lock the measurement in place and set the cutting depth of your saw blade/router bit, or set fences.

  1. Match the material's thickness - Place material under P2, then lower P2 so that it rests on top of the material.
  2. Find the 1/2 point - the bottom of P3 automatically adjusts to exactly 1/2 the thickness of the material.
  3. Transfer measurement - Lock in the measurement and use the FITFINDER to set cutting depths and fences.

Set fences for resawing. Set fence positions and resaw material on the bandsaw with zero guesswork.

Center stock on the lathe. Find the center of stock and mount material on the lathe for safer spindle turning.

Set precise cutting depths. Lock in the measurement and transfer to the router or table saw to set cutting depth for flawless lap joints.

Center router bits. Quickly and accurately find the halfway point of material.

 

Prop 65WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov