CMT Rabbeting Carbide Tipped Router Bit Set with 6 Bearings
These rabbeting sets allow you to make an endless number of cuts by adjusting the cutting height on your router and changing the bearing on the bit.
Maximum height of cut (I): 3/4"
Bearing diameters and depth of rabbet:
1-3/8"bearing: acts like a flush trim bit
1-1/8" bearing: 1/8" rabbet
3/4" bearing: 5/16" rabbet
5/8" bearing: 3/8" rabbet
1/2" bearing: 7/16" rabbet
3/8" bearing: 1/2" rabbet
See FACT Sheet HERE.
Be sure to keep the black bearing washer right side up to correspond with the bearing rotation when reassembling the bearing. Improper reassembly can cause the screw to come loose. Each set comes complete with one rabbeting bit and six interchangeable ball bearing guides.
CMT carbide tipped router bits produce flawless profiles due to the following features:
SUPERIOR HIGH STRENGTH STEEL BODIES: CMT uses only high-quality, solid bar stock sourced from Switzerland, which provides exceptional resistance to fatigue and abrasion. Larger diameter bodies are heat forged before turning into precise bit bodies. This extra step produces a radial grain orientation which offers large diameter bits extra strength and durability. All machining fully automated ensuring the shanks and bodies are accurate and perfectly balanced.
ANTI-KICKBACK DESIGN: This design controls the depth of cut and minimizes the chance of kickback, reducing your risk of injury.
SINTERHIP HI-DENSITY INDUSTRIAL CHROME CARBIDE: CMT uses specially formulating chrome carbide specially designed to cut wood and laminates. A new process called SinterHIP (Hot Isostatic Pressing), helps prevent material failure and increases cutting life.
TRI-METAL BRAZING: CMTs silver-copper-silver brazing “sandwich” provides a tight bond between the steel and the carbide, with a shock absorbing effect to protect the carbide tips when cutting harder woods and reduces the chance of failed welds.
NON-STICK ORANGE SHIELD COATING®: Prevents bit from heating up, reduces pitch build-up, protects against corrosion, and provides a longer bit life.
MULTI-AXIS GRINDING CREATES A MIRROR FINISH LASTING 3X LONGER: Sharpening is done to extreme precision on multi-axis CNC machines. Each bevel and angle are ground or sharpened to the micron, to produce a cutting edge that is both razor sharp, yet extremely durable.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov