Titebond Quick & Thick Multi-Surface Glue

Titebond Quick & Thick Multi-Surface Glue is the thickest, fastest-drying water-based glue available for use with porous and semi-porous materials. 2x faster, 3x thicker than traditional PVA glues. So thick it stays where applied and does not run or drip during extracton. It is ideal for wood, pottery, ceramic, stone, glass, fabrics, leather and most craft-type materials. Titebond Quick & Thick Multi-Surface Glue provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. It also develops a bond stronger than the wood itself, dries clear and is unaffected by finishes.

 APPLICATION GUIDELINES:

• Application temp above 50°F (10°C)
• Open assembly time: 3-5 minutes (70°F/50%RH)
• Total assembly time: 10-15 minutes (70°F/50%RH)
• Minimum required spread: Approximately 6 mils or 250 square feet per gallon
• Clean up with damp cloth while glue is wet. Scrape off and sand dried excess
• Required clamping pressure: enough to bring joints tightly together (generally, 100-150 PSI for softwoods, 125-175 PSI for medium woods, and 175-250 for hardwoods)

LIMITATIONS:

• Not intended for exterior use where moisture is likely
• Not for structural or load bearing applications
• Not recommended for photos, washable wearables, metals, plastics or rubber
• Storage life 24 months in tightly closed containers at 75°F
• To assure optimal bond 50°F is the minimum temperature of the glue, air, and materials during application
• KEEP FROM FREEZING. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form
• KEEP OUT OF THE REACH OF CHILDREN

Woodshop and Cabinet Shop Glues Brochure