Wood Turning

Make your own custom lathe tool handles using these robust solid brass ferrules. Ferrules made from solid brass that has been annealed or hardened....

These live centers have and oversize 60-degree point cones that are 2" long by 1-1/4" in overall diameter. Overall lengths are 4-3/8”. Units conta...

Taytools live center head and body are made from hardened alloy steel and then precision ground to concentricity of +/- 0.00078". Triple sealed bea...

Available in the 60 or 120 grit. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

These are detailing tools used on between-center work, where the grain is running parallel to the lathe bed. Spindle gouges are used to create cove...

This 3 jaw drill chuck with MT1 taper Can mount in a drill press, mill or the head or tail stock on wood or metal lathes. It is perfect for holding...

The slim blade allows for a very fine parted section to be achieved. This is especially useful when grain match after parting is required. e.g. par...

These high quality modular tool rest posts are made from super strong, precision ground polished alloy steel for vibration free turning. This modul...

Robert Sorby offers the many of their tools in unhandled versions allowing turners the flexibility to fashion their own custom wood handles. These ...

The most comprehensive of Robert Sorby’s full size sets. This eight piece deluxe set carries all the core tools a turner will need to accomplish ma...

Robert Sorby offers the many of their tools in unhandled versions allowing turners the flexibility to fashion their own custom wood handles. These ...

This very fine 1/16" wide parting tool limits the amount of material lost when parting off which is especially useful when turning small boxes from...

*Not eligible for use with any discount codes* SHARPENING REFINED The Robert Sorby ProEdge offers effortlessly repeatable sharpening every time. H...

Largely inspired by Norwegian turner Petter Herud a series of Revolving (or Live) Stebcentres has been introduced. Not only do these offer the same...

Also known simply as a roughing gouge. Recommended for the initial turning of uneven or square spindle stock to round. The shape of the spindle rou...

Available in 600, 1200, or 3000 grit. WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

This 7 piece barrel trimming kit allows you to quickly square the ends of pen tubes before final assembly. Designed to be used with hand-held drill...