Skip to content

Tools > Dust Collection

Blast Gates
Couplings
Dust Hoods
Elbows
Flanges
Floor Sweeps
Blast Gates Couplings Dust Hoods Elbows Flanges Floor Sweeps
Flexible Hoses
Hose Clamps
Reducers
Separators
T's
Y's
Flexible Hoses Hose Clamps Reducers Separators T's Y's

 

Dust collection is vitally important in maintaining shop cleanliness and the health of machine operators. The most efficient way to collect dust and debris is at the machines at the point of dust generation. Trying to remove dust from the air once it is released is much more difficult and less efficient. We carry a wide selection of dust collection hoses and components to outfit any system.

2-1/2" Dust Collection Shop-Vac Cyclone Separator Lid

Taytools
Original price $21.99 - Original price $21.99
Original price $21.99
$21.99
$21.99 - $21.99
Current price $21.99
in stock

Improve your dust collector or shop-vac's efficiency by converting to a two-stage unit with this cyclone lid and a standard 5 gallon bucket. This c...

View full details
Original price $21.99 - Original price $21.99
Original price $21.99
$21.99
$21.99 - $21.99
Current price $21.99

Flexible Cuff Dust Collector Hose Couplers (DCE)

Taytools
Original price $8.99
Original price $8.99 - Original price $8.99
Original price $8.99
$6.29 - $8.99
$6.29 - $8.99
Current price $6.29
in stock

Designed to connect two dust collection or shop-vac hoses or fittings together with an air-tight fit. Made from flexible rubber to accommodate slig...

View full details
Original price $8.99
Original price $8.99 - Original price $8.99
Original price $8.99
$6.29 - $8.99
$6.29 - $8.99
Current price $6.29
Save up to 30% Save %

4" to 2.5" OD Duct Reducer ABS Plastic (DCE)

Taytools
Original price $8.39
Original price $8.39 - Original price $8.39
Original price $8.39
Current price $2.98
$2.98 - $2.98
Current price $2.98
in stock

These reducers allow fitting of a 2.5" dust collection hose to a 4" hose Smaller end has 2.5" outer diameter and 2.3" inner diameter opening Large...

View full details
Original price $8.39
Original price $8.39 - Original price $8.39
Original price $8.39
Current price $2.98
$2.98 - $2.98
Current price $2.98
Save 64% Save %

4" ABS Plastic Dust Collection Blast Gates (DCE)

Taytools
Original price $10.99 - Original price $52.99
Original price $10.99 - Original price $52.99
Original price $10.99
$2.98 - $22.48
$2.98 - $22.48
Current price $2.98
in stock

Both openings are 1.25" long and taper from 3.85" to 4" and will fit 4" flexible hose or tapered dust fittings Made from strong 1/8" thick abrasio...

View full details
Original price $10.99 - Original price $52.99
Original price $10.99 - Original price $52.99
Original price $10.99
$2.98 - $22.48
$2.98 - $22.48
Current price $2.98
Save up to 58% Save %

5 Piece Double Loop Spring Hose Clamps

Taytools
Original price $18.99 - Original price $20.99
Original price $18.99 - Original price $20.99
Original price $18.99
$18.89 - $18.99
$18.89 - $18.99
Current price $18.89
in stock

Attach your dust hose to your dust collection fittings quickly and easily without tools. Simply squeeze both rubber grip ends to expand and release...

View full details
Original price $18.99 - Original price $20.99
Original price $18.99 - Original price $20.99
Original price $18.99
$18.89 - $18.99
$18.89 - $18.99
Current price $18.89
Save up to 10% Save %

5 Piece Double Wire Loop Spring Steel Hose Clamps

Taytools
Original price $8.39
Original price $8.39 - Original price $8.39
Original price $8.39
$4.99 - $8.39
$4.99 - $8.39
Current price $4.99
in stock

Turn screw to tighten quickly to secure hose in place Spring steel maintains pressure to hold hose securely in place Double-Loop design has tighte...

View full details
Original price $8.39
Original price $8.39 - Original price $8.39
Original price $8.39
$4.99 - $8.39
$4.99 - $8.39
Current price $4.99
Save up to 41% Save %

4" Blast Gates with Wall Mounting Bracket (DCE)

Taytools
Original price $10.99 - Original price $50.99
Original price $10.99 - Original price $50.99
Original price $10.99
$7.48 - $50.99
$7.48 - $50.99
Current price $7.48
in stock

This version of our blast gates has a built-in wall mounting bracket to allow secure anchoring to the wall to prevent sloppy opening and closing. B...

View full details
Original price $10.99 - Original price $50.99
Original price $10.99 - Original price $50.99
Original price $10.99
$7.48 - $50.99
$7.48 - $50.99
Current price $7.48
Save up to 45% Save %

Wall Mount Bracket for 2-1/2" to 6" Blast Gates (DCE)

Taytools
Original price $8.99 - Original price $37.99
Original price $8.99 - Original price $37.99
Original price $8.99
$7.69 - $31.99
$7.69 - $31.99
Current price $7.69
Only 2 left!

Uses this universal blast gate mounting bracket to easily and quickly mount any 2-1/2" to 6" ABS or aluminum blast gate to any solid surface. Will ...

View full details
Original price $8.99 - Original price $37.99
Original price $8.99 - Original price $37.99
Original price $8.99
$7.69 - $31.99
$7.69 - $31.99
Current price $7.69
Save up to 16% Save %

2-1/2" ABS Plastic Dust Collection Blast Gates - 114838 (DCE)

Taytools
Original price $12.99 - Original price $54.99
Original price $12.99 - Original price $54.99
Original price $12.99
$9.35 - $53.99
$9.35 - $53.99
Current price $9.35
in stock

Blast gates are used to open and close branch ducts to divert airflow only to those machines in operation. This conserves air volume and keeps suct...

View full details
Original price $12.99 - Original price $54.99
Original price $12.99 - Original price $54.99
Original price $12.99
$9.35 - $53.99
$9.35 - $53.99
Current price $9.35
Save up to 28% Save %

4" to 2.5" Reducing Three-Way Y Connector 114889

Taytools
Original price $10.99 - Original price $10.99
Original price $10.99
$10.99
$10.99 - $10.99
Current price $10.99
in stock

Allows branching of dust collection to add every machine in the shop Nominal dimensions of two (2) large openings are outer diameter of 3-15/16" a...

View full details
Original price $10.99 - Original price $10.99
Original price $10.99
$10.99
$10.99 - $10.99
Current price $10.99

4" Three-Way Y Connector

Taytools
Original price $11.99 - Original price $11.99
Original price $11.99
$11.99
$11.99 - $11.99
Current price $11.99
Only 3 left!

Allows branching of dust collection to add every machine in the shop Nominal dimensions: outer diameter of openings are 3-15/16 and inner diameter...

View full details
Original price $11.99 - Original price $11.99
Original price $11.99
$11.99
$11.99 - $11.99
Current price $11.99

2-1/2" 90 Degree Three-Way T Connector (DCE)

Taytools
Original price $9.99
Original price $9.99 - Original price $9.99
Original price $9.99
Current price $4.48
$4.48 - $4.48
Current price $4.48
in stock

Allows branching of dust collection to add every machine in the shop Nominal dimensions: outer diameter of openings are 2-7/16" and inner diameter...

View full details
Original price $9.99
Original price $9.99 - Original price $9.99
Original price $9.99
Current price $4.48
$4.48 - $4.48
Current price $4.48
Save 55% Save %

4" 90 Degree Three-Way T Connector

Taytools
Original price $11.99 - Original price $11.99
Original price $11.99
$11.99
$11.99 - $11.99
Current price $11.99
in stock

Allows branching of dust collection to add every machine in the shop Nominal dimensions: outer diameter of openings are 3-15/16" and inner diamete...

View full details
Original price $11.99 - Original price $11.99
Original price $11.99
$11.99
$11.99 - $11.99
Current price $11.99

4" Flexible Hose Connector, ABS Plastic

Taytools
Original price $8.39 - Original price $8.39
Original price $8.39
$8.39
$8.39 - $8.39
Current price $8.39
in stock

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Original price $8.39 - Original price $8.39
Original price $8.39
$8.39
$8.39 - $8.39
Current price $8.39

2-1/2" 90 Degree Elbow Connector (DCE)

Taytools
Original price $9.99
Original price $9.99 - Original price $9.99
Original price $9.99
Current price $4.48
$4.48 - $4.48
Current price $4.48
in stock

These elbow connectors prevent binding or kinking when you need to bend a dust collector hose at sharper angles Nominal dimensions: both ends have...

View full details
Original price $9.99
Original price $9.99 - Original price $9.99
Original price $9.99
Current price $4.48
$4.48 - $4.48
Current price $4.48
Save 55% Save %

4" 90 Degree Curved Elbow Connector

Taytools
Original price $10.99 - Original price $10.99
Original price $10.99
$10.99
$10.99 - $10.99
Current price $10.99
in stock

These elbow connectors prevent binding or kinking when you need to bend a dust collector hose at sharper angles Nominal dimensions: both ends have...

View full details
Original price $10.99 - Original price $10.99
Original price $10.99
$10.99
$10.99 - $10.99
Current price $10.99

5" to 4" OD Duct Reducer ABS Plastic

Taytools
Original price $9.59 - Original price $9.59
Original price $9.59
$9.59
$9.59 - $9.59
Current price $9.59
in stock

These reducers allow fitting of a 4" dust collection hose to a 5" hose Smaller opening has 3.94" outer diameter and 3.7" inner diameter Larger ope...

View full details
Original price $9.59 - Original price $9.59
Original price $9.59
$9.59
$9.59 - $9.59
Current price $9.59

6" to 4" OD Duct Reducer ABS Plastic

Taytools
Original price $10.99 - Original price $10.99
Original price $10.99
$10.99
$10.99 - $10.99
Current price $10.99
in stock

These reducers allow fitting of a 4" dust collection hose to a 6" hose. Opening on smaller end is: outer diameter 3.930" and tapers to 4" with inn...

View full details
Original price $10.99 - Original price $10.99
Original price $10.99
$10.99
$10.99 - $10.99
Current price $10.99

5.5" x 2.5" Dust Port Flange, 4" OD (DCE)

Taytools
Original price $8.39
Original price $8.39 - Original price $8.39
Original price $8.39
Current price $4.48
$4.48 - $4.48
Current price $4.48
in stock

This small dust port or flange can be used to collect dust from a variety of machines Overall size is 5.5" in diameter by 2.5" tall Opening is out...

View full details
Original price $8.39
Original price $8.39 - Original price $8.39
Original price $8.39
Current price $4.48
$4.48 - $4.48
Current price $4.48
Save 47% Save %

3.75" x 2.5" Dust Port Flange, 2.5" OD - 114885

Taytools
Original price $0.00 - Original price $0.00
Original price $0.00
$7.19
$7.19 - $7.19
Current price $7.19
in stock

These small dust ports or flanges can be used to collect dust from a variety of machines. Overall size is 3.75" in diameter by 2.5" tall Opening h...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$7.19
$7.19 - $7.19
Current price $7.19

24" x 7" x 2" Floor Sweep ABS Plastic, 4" OD

Taytools
Original price $18.99 - Original price $18.99
Original price
$18.99
$18.99 - $18.99
Current price $18.99
in stock

This floor sweep can be secured to the floor and then debris can be swept inside and then vacuumed away with a dust collector Overall size: 24" wi...

View full details
Original price $18.99 - Original price $18.99
Original price
$18.99
$18.99 - $18.99
Current price $18.99

10" x 4" x 9" Deep ABS Plastic Dust Hood, 4" OD (114899) (DCE)

Taytools
Original price $16.99
Original price $16.99 - Original price $16.99
Original price $16.99
Current price $7.48
$7.48 - $7.48
Current price $7.48
in stock

These dust hoods can be used to collect dust from a variety of machines or can be placed on a table close to where dust is being produced. Built i...

View full details
Original price $16.99
Original price $16.99 - Original price $16.99
Original price $16.99
Current price $7.48
$7.48 - $7.48
Current price $7.48
Save 56% Save %

13" x 16" x 10" Deep ABS Plastic Dust Hood, 4" OD

Taytools
Original price $0.00 - Original price $0.00
Original price $0.00
$23.99
$23.99 - $23.99
Current price $23.99
Only 1 left!

These dust hoods can be used to collect dust from a variety of machines or can be placed on a table close to where dust is being produced. These f...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$23.99
$23.99 - $23.99
Current price $23.99

9.5" x 4.5" x 3.5" Deep ABS Plastic Dust Hood, 4" OD 114898

Taytools
Original price $10.99 - Original price $10.99
Original price $10.99
$10.99
$10.99 - $10.99
Current price $10.99
in stock

These dust hoods can be used to collect dust from a variety of machines or can be placed on a table close to where dust is being produced. Made fr...

View full details
Original price $10.99 - Original price $10.99
Original price $10.99
$10.99
$10.99 - $10.99
Current price $10.99