Titebond II Extend Wood Glue

Titebond II Extend Wood Glue combines weatherproof performance (ANSI Type II water-resistance) with a slower speed of set. Water resistant and no mixing required! It is the first one-part glue to pass Type II water resistant testing. It is ideal for exterior applications that involve more complex assemblies. It also provides a translucent glue line, offers excellent sandability, solvent resistant, and is unaffected by finishes. Titebond II Extend offers superior performance on all common wood species, particleboard, MDF, plywood and other porous materials. In addition, it is compatible for use with Hot Press and radio frequency (R-F) gluing systems.

 APPLICATION GUIDELINES:

• Application temp above 50°F (10°C)
• Open assembly time: 15 minutes (70°F/50%RH)
• Total assembly time: 20-25 minutes (70°F/50%RH)
• Easy clean. Damp cloth while glue is wet. Scrape off and sand dried excess
• Minimum required spread: Approximately 6 mils or 250 square feet per gallon
• Required clamping pressure: enough to bring joints tightly together (generally, 30-80 PSI for HPL, 100-150 PSI for softwoods, 125-175 PSI for medium woods, and 175-250 for hardwoods)
• Full Strength Bond: allow 24 hours

LIMITATIONS:

• Not for continuous submersion or for use below the waterline
• Not for structural or load bearing applications
• Storage life 12 months in tightly closed containers at 70°F
• To assure optimal bond 60°F is the minimum temperature of the glue, air, and materials during application
• Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern
• STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY
• KEEP FROM FREEZING. Freezing may not affect the function of the product but may cause it to thicken

Woodshop and Cabinet Shop Glues Brochure