Dust Collection Overstock
Aluminum Self-Cleaning Blast Gates 2-1/2", 3", 4", 5", and 6" OD (DCE)
TaytoolsWill fit 2-1/2", 3", 4", 5", or 6" diameter hoses or ducts Direct air flow to exactly where you need it and maximize dust extraction by opening an...
View full details2-1/2" ABS Plastic Dust Collection Blast Gates - 114838 (DCE)
TaytoolsBlast gates are used to open and close branch ducts to divert airflow only to those machines in operation. This conserves air volume and keeps suct...
View full details4" Self-Cleaning ABS Blast Gates - 114830 (DCE)
TaytoolsThis version of our blast gates has a built-in wall mounting bracket to allow secure anchoring to the wall to prevent sloppy opening and closing. B...
View full details4" OD Self Cleaning Anti Clog Blast Gates (DCE)
TaytoolsHas a gate that slides completely through the housing which is self cleaning and eliminates chip build up Both openings are 1.25" long and taper f...
View full details4" Blast Gates with Wall Mounting Bracket (DCE)
TaytoolsThis version of our blast gates has a built-in wall mounting bracket to allow secure anchoring to the wall to prevent sloppy opening and closing. B...
View full details8" x 13.5" x 2.5" ABS Plastic Flange, 4" OD (DCE)
TaytoolsUsed to connect dust collection hoses to the underside of table saws, jointers, etc. Made from strong 1/8" thick abrasion resistant ABS plastic th...
View full details4" ABS Plastic Dust Collection Blast Gates (DCE)
TaytoolsBoth openings are 1.25" long and taper from 3.85" to 4" and will fit 4" flexible hose or tapered dust fittings Made from strong 1/8" thick abrasio...
View full details4" Blast Gate, Threaded End & Quick Disconnect End (DCE)
TaytoolsBoth openings are 1.25" long and taper from 3.85" to 4" and will fit 4" flexible hose or tapered dust fittings Made from strong 1/8" thick abrasio...
View full details5.5" x 2.5" Dust Port Flange, 4" OD (DCE)
TaytoolsThis small dust port or flange can be used to collect dust from a variety of machines Overall size is 5.5" in diameter by 2.5" tall Opening is out...
View full details8" x 8" ABS Plastic Flange, 4" OD A85014 (DCE)
TaytoolsUsed to connect dust collection hoses to the underside of table saws, jointers, etc. Made from strong 1/8" thick abrasion resistant ABS plastic th...
View full details4” Dust Collection Cyclone Separator Kit for Trash Cans (DCE)
TaytoolsImprove your dust collector’s efficiency by converting to a two-stage unit with this 4" cyclone chip separator kit. The kit includes two elbows, tw...
View full detailsFlexible Cuff Dust Collector Hose Couplers (DCE)
TaytoolsDesigned to connect two dust collection or shop-vac hoses or fittings together with an air-tight fit. Made from flexible rubber to accommodate slig...
View full details4" to 2.5" OD Duct Reducer ABS Plastic (DCE)
TaytoolsThese reducers allow fitting of a 2.5" dust collection hose to a 4" hose Smaller end has 2.5" outer diameter and 2.3" inner diameter opening Large...
View full details10" x 4" x 9" Deep ABS Plastic Dust Hood, 4" OD (114899) (DCE)
TaytoolsThese dust hoods can be used to collect dust from a variety of machines or can be placed on a table close to where dust is being produced. Built i...
View full details2-1/2" Three-Way Y Connector (DCE)
TaytoolsAllows branching of dust collection to add every machine in the shop Nominal dimensions of openings are outer diameter of 2-7/16" and inner diamet...
View full details4" to 2.25" OD Cone Reducer ABS Plastic (DCE)
TaytoolsThese reducers allow fitting into a 2.5" dust port to a 4" hose Smaller end has 2.3" outer diameter and 2.13" inner diameter; Larger end has 3.98"...
View full details2-1/2" 90 Degree Elbow Connector (DCE)
TaytoolsThese elbow connectors prevent binding or kinking when you need to bend a dust collector hose at sharper angles Nominal dimensions: both ends have...
View full detailsWall Mount Bracket for 2-1/2" to 6" Blast Gates (DCE)
TaytoolsUses this universal blast gate mounting bracket to easily and quickly mount any 2-1/2" to 6" ABS or aluminum blast gate to any solid surface. Will ...
View full details4" x 4" x 3.75" Angled Dust Port Flange, 2.5" OD (DCE)
TaytoolsThese small dust ports or flanges can be used to collect dust from a variety of machines. Overall size is 4" x 4" square base and 3.75" tall Openi...
View full details2-1/2" 90 Degree Three-Way T Connector (DCE)
TaytoolsAllows branching of dust collection to add every machine in the shop Nominal dimensions: outer diameter of openings are 2-7/16" and inner diameter...
View full details