dust collection

Turn screw to tighten quickly to secure hose in place Spring steel maintains pressure to hold hose securely in place Double-Loop design has tighte...

These small dust ports or flanges can be used to collect dust from a variety of machines. Overall size is 3.75" in diameter by 2.5" tall Opening h...

These small dust ports or flanges can be used to collect dust from a variety of machines. Overall size is 4" x 4" square base and 3.75" tall Openi...

This small dust port or flange can be used to collect dust from a variety of machines Overall size is 5.5" in diameter by 2.5" tall Opening is out...

These reducers allow fitting of a 2.5" dust collection hose to a 4" hose Smaller end has 2.5" outer diameter and 2.3" inner diameter opening Large...

These reducers allow fitting into a 2.5" dust port to a 4" hose Smaller end has 2.3" outer diameter and 2.13" inner diameter; Larger end has 3.98"...

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

These reducers allow fitting of a 4" dust collection hose to a 5" hose Smaller opening has 3.94" outer diameter and 3.7" inner diameter Larger ope...

These elbow connectors prevent binding or kinking when you need to bend a dust collector hose at sharper angles Nominal dimensions: both ends have...

Allows branching of dust collection to add every machine in the shop Nominal dimensions: outer diameter of openings are 2-7/16" and inner diameter...

Allows branching of dust collection to add every machine in the shop Nominal dimensions of openings are outer diameter of 2-7/16" and inner diamet...

Blast gates are used to open and close branch ducts to divert airflow only to those machines in operation. This conserves air volume and keeps suct...

Simply turn the key to expand and release band hose clamp Made from zinc plated hardened steel Includes five (5) Easy Release thumb screw hose cla...

These tool-free hose clamps ensure maximal connectivity of spiral hose to fittings. The unique bridge component steps over coils in right-hand spir...

Has a gate that slides completely through the housing which is self cleaning and eliminates chip build up Both openings are 1.25" long and taper f...

Both openings are 1.25" long and taper from 3.85" to 4" and will fit 4" flexible hose or tapered dust fittings Made from strong 1/8" thick abrasio...

Used to connect dust collection hoses to the underside of table saws, jointers, etc. Made from strong 1/8" thick abrasion resistant ABS plastic th...

These reducers allow fitting of a 4" dust collection hose to a 6" hose. Opening on smaller end is: outer diameter 3.930" and tapers to 4" with inn...

These elbow connectors prevent binding or kinking when you need to bend a dust collector hose at sharper angles Nominal dimensions: both ends have...

Allows branching of dust collection to add every machine in the shop Nominal dimensions of two (2) large openings are outer diameter of 3-15/16" a...