Brands > Whiteside

Use this tool to square up the round corners left behind when routing hinge mortises. Hold unit in mortise corner and strike with hammer. Our ch...

This chamfer bit is designed to cut a 45 degree angle on your work piece. Originally, the bit was specifically designed to fit in trim route...

A convenient starter set made up of four popular router bits all in a 1/4" shank. Works well in compact routers or laminate trimmers. The set ...

Roundover bits are by far the most used edge forming bits in woodworking. This set offers the most common radii (R1/4”, R3/8”, R1/2”) in 1/2” ...

The 401 (1/2" shank) and 402 Basic (1/4" Shank) 7 Piece Bit Sets are made up of only the most popular woodworking bits in 1/2" and 1/4" shank ...

Bowl and Tray bits were designed as an alternate cutting shape to the traditional Round Nose. These bits have a flat bottom so that ridges ar...

Basic single flute Straight bit made out of solid carbide for extended life. Materials: Natural woods, composite woods, hard plastics Specs: SKU...

These spiral bits offer state-of-the-art results in flush trimming. Made from solid carbide, each bit contains up cut and down cut flutes and is ti...

Designed for flattening tabletops, benchtops, and other wooden surfaces where you desire a smooth, clean surface. Perfect for router sleds or re...

Combination flush trim bits have a bearing on both ends of the cutting edge. This configuration allows the user to pick which side they want...

Our largest Rabbet Bit in a set with five bearings. Makes those extra deep 1/2", 9/16”, 5/8”, 11/16”, and 3/4" Rabbet cuts. Hex Wrench inclu...

Flush trim bits use an end bearing to ride an edge and trim your project to the desired project design or template. Manufactured with two fl...

Change your Rabbet depth by changing the bearing! This 1/4" set includes all eight bearings to make 1/8”, 3/16”, 1/4", 1/2", 7/16”, 3/8”, 5/...

Round Nose bits are a basic curved bit often used for sign making. The round nose is perfect for cutting round grooves in any project without l...

Round Nose bits are a basic curved bit often used for sign making. The round nose is perfect for cutting round grooves in any project without ...

Roundover bits provide a curved edge to your workpiece and are the most popular type of edge forming bit. Materials: Natural woods, compos...

These bits are designed to cut rabbets and add slots to the end of your material. Increase the versatility of these bits by simply changing ...

Extra small brass pilot (5/32” dia.) allows these bits to roundover edges on finely detailed workpieces with intricate contours, tight confi...

Use this two piece Straight Tongue and Groove set with a ball bearing guide for connecting a joint in your project. Recommended for a material...

Template bits usually consist of a straight bit with a bearing. Simply align the bearing with your template and cut out your project. Materi...

This set is for cabinet door construction with actual size 1/4” panels. 1/2” shank only. Replacement Groovers: #6625 on Groover Cutter and two #...

Spiral bits provide a shear cutting edge that leaves a smoother cut than standard router bits. The down cut spiral design provides the best top sur...

Made from solid carbide, each bit contains up cut and down cut flutes. This flute design creates a compression cut that prevents fraying and splint...