Brands > Whiteside Machine Company > Router Bits > Form Bits

Dovetail joints have traditionally stood as a mark of craftsmanship to the woodworker. The interlocking notches create one of the strongest joints ...

This chamfer bit is designed to cut a 45 degree angle on your work piece. Originally, the bit was specifically designed to fit in trim route...

V-Groove bits are used for a variety of projects where a standard v-point cut is desired. V-Groove bits are available in 60, 90, and 120 degre...

V-Groove bits are used for a variety of projects where a standard v-point cut is desired. V-Groove bits are available in 60, 90, and 120 degre...

Bowl and Tray bits were designed as an alternate cutting shape to the traditional Round Nose. These bits have a flat bottom so that ridges ar...

The Ultimate Flush Trim Bits for material up to 2-1/8" thick. The "Ultra-Long ULTIMATE" Flush Trim Bit has a compression design to provide the best...

Designed for flattening tabletops, benchtops, and other wooden surfaces where you desire a smooth, clean surface. Perfect for router sleds or re...

Our largest Rabbet Bit in a set with five bearings. Makes those extra deep 1/2", 9/16”, 5/8”, 11/16”, and 3/4" Rabbet cuts. Hex Wrench inclu...

Use this Locking Drawer Glue Joint bit to make both cuts in the drawer of your project. Recommended for a minimum material thickness of 1/2"...

Roundover and more! Conventional Beading only cuts a shallow 1/16” bead. Expand your capabilities with this versatile set. Deeper beads create...

Change your Rabbet depth by changing the bearing! This 1/4" set includes all eight bearings to make 1/8”, 3/16”, 1/4", 1/2", 7/16”, 3/8”, 5/...

V-Groove bits are used for a variety of projects where a standard v-point cut is desired. V-Groove bits are available in 60, 90, and 120 degre...

Use this two piece Straight Tongue and Groove set with a ball bearing guide for connecting a joint in your project. Recommended for a material ...

Round Nose bits are a basic curved bit often used for sign making. The round nose is perfect for cutting round grooves in any project without l...

Round Nose bits are a basic curved bit often used for sign making. The round nose is perfect for cutting round grooves in any project without ...

Roundover bits provide a curved edge to your workpiece and are the most popular type of edge forming bit. Materials: Natural woods, compos...

This Shaker Style Raised Panel set comes with three bearings (B3, B7, B8) to change the length of the tongue. A Hex key is included, and the bi...

These bits are designed to cut rabbets and add slots to the end of your material. Increase the versatility of these bits by simply changing ...

This arbor is designed for use with the 1-7/8" cutting diameter Slotting Cutters in the 6700 series. The arbor includes a B5 bearing for a 1/2" dep...

Extra small brass pilot (5/32” dia.) allows these bits to roundover edges on finely detailed workpieces with intricate contours, tight confi...

Use this Standard Glue Joint bit to make both cuts for connecting a joint in your project. Recommended for a material thickness of 1/2"-1-1/...

The Ultimate Flush Trim Bits for material up to 2-1/8" thick. The "Ultra-Long ULTIMATE" Flush Trim Bit has a compression design to provide the best...