Magic Fix Glue and FillerSpecifications:CA Glue 6 bottles 10 ml, Reinforcement Powder 2 bottles black 22 gram, 1 bottle grey 22 gram, spreader, 6 fine glue tips, razor blade and rubber glove.
Repair (almost) everything With Magic Fix - Plastic glue and filler.
Long lasting repair in seconds with an ultra strong sandable and paintable result. Magic Fix is a glue and filler for a fast and strong repair of various materials. It is a super glue to be combined with black and grey reinforcement powder. If it’s worth repairing: Fix it, Sand it, Paint it! Ready!
Use Magic Fix for gluing, filling and repairing of various materials such as steel, plastics, aluminum, fiberglass, carbon fiber, plastics and rubber. Fill cracks or spaces with Magic Fix.
Benefits of Magic Fix- Drying time: 7 seconds
- Processable: after 7 seconds
- After applying: sandable and paintable
- Usage on visible parts and non-visible parts
Technical features of Magic Fix- Magic Fix glue (A): after opening ½ year
- Shelf life Magic Fix: 2 year
- Heat resistant: to 160°C
- Resistant to: oil
Application Process of Magic Fix1) Glue together- Preparation: Clear the surface of paint, dust, grease and oil, make sure that the area to be repaired is clean and dry. Roughen the surface with sanding paper. Wear the enclosed glove to protect your hand. Also wear eye protection f.i. Colad Safety Goggles (art.no. 5085)
- Step 1: Use a knife to cut the nozzle of the Colad Magic Fix Reinforcement Powder. Cut off the top of the Glue nozzle.
- Step 2: Apply a small amount of Colad Magic Fix Glue on one side and push the parts firmly together for a few seconds. Wait 7 seconds and ready.
2) Filling of cracks with Filling Powder and glue together.- Preparation: Clear the surface of paint, dust, grease and oil, make sure that the area to be repaired is clean and dry. Roughen the surface with sanding paper. Wear the enclosed glove to protect your hand. Also wear eye protection f.i. Colad Safety Goggles (art.no. 5085)
- Step 1: Use a knife to cut the nozzle of the Colad Magic Fix Reinforcement Powder. Cut off the top of the Glue nozzle.
- Step 2: Depending on the substrate or the desired result, choose the grey or black color of the Colad Magic Fix Reinforcement Powder. Drop the appropriate amount of Colad Magic Fix Reinforcement Powder to cover the glue on the spot to be repaired or filled (hole/crack) in layers of maximum 2 mm. Make sure that the Colad Magic Fix Reinforcement Powder is evenly distributed. If necessary, use the applicator to adjust the powder shape and dosage.
- Step 3: Then, drop the Colad Magic Fix Glue on the Colad Magic Fix Reinforcement Powder until the powder no longer absorbs the Colad Magic Fix Glue. Make sure the tip of the Colad Magic Fix Glue does not bond with the Colad Magic Fix Reinforcement Powder. The Glue and the Powder form a strong, hard seal within a few seconds. It can be processed after 7 seconds. If the repair thickness is not enough, repeat step 2 + 3.
Application possibilities of Magic FixFor gluing, for filling, for repairing of various materials such as:- Steel
- Plastics
- Fiberglass
- Carbon fiber
- Plastics and rubber
Fill cracks or spaces with Magic Fix for example on:- Car bumper fixing points
- Hard plastic car door handle
- Filling and re-drilling
- Refitting screws
- Rear view mirrors
- Tappet covers
- Grills & bumpers
