Ridge Carbide 10" 40 Tooth Super Combination Blade .125" Full Kerf 4 Alternate Top Bevel (ATB) and one Flat Top Grind (FTG) TS21040-5/8
The TS2000 is the American Woodworker and WOOD Magazine's top rated all-purpose 40 tooth combination table saw blade that outperformed 30 other brands in their tests. It’s serious woodworkers first choice, get super smooth (as sanded) rip and crosscut on all hardwoods and softwoods up to 2" thick. Get clean crosscuts and rips on plywood without bottom blowout. The TS2000 full kerf 1/8” blade are roller tensioned steel body that is designed to remain stable and harmonic free during the most demanding cutting situations. No dampeners are needed to get superior performance so you can use the blades to full depth. The TS2000 has C4 micrograin carbide teeth that are computer machine ground on European CNC saw grinders. All teeth go through a four-step shaping and sharpening process. The final 1200 grit finish pass creates a super fine razor-sharp edge. Customers tell us that their blade lasted 3 to 5 years before it needed sharpening. The TS2000 has WH style carbide teeth that are 1/3 larger than most other brands which can be resharpened 20 times due to increased thickness. Other low-cost blades have a .010” radial or side clearance to keep irregular teeth from rubbing on the sides of the cut resulting in scratchy saw cut and burn marks. The TS2000 is so accurate that the radial clearance is reduced to a mere .001” which dramatically improves the smoothness of the finished cut. The TS2000 runout is .001" to .0015," other blades might have .008” - .012” side run out which can result in inferior cuts. The best feature the TS2000 has are the 8 flat top raker teeth among the 32 ATB teeth. Every fifth tooth on the blade is a flat clean out tooth which cuts a crisp flat bottom. Finally now you can own a real all-purpose blade you can not only do excellent rips and crosscuts and is also great for box and finger joints or quick dado cut without having to change blades.
Ridge Carbide blades have earned “Top Tool”, “Editor’s Choice” , “Best Overall” and “Best Quality Cut” in saw blade reviews performed by Fine Woodworking, Fine Homebuilding, American Woodworker and Wood Magazine.
Applications: Rips and crosscuts hard and soft wood, smooth as a baby’s bottom. No bottom splintering on plywood veneers. Ultra smooth rip and cross cuts eliminate the need for sanding. The Raker flat top grind tooth design produces nearly flat bottom cuts.
Machines: table saw
- High-grade, fine grain C-4 Micro-Grain carbide tips allow more sharpening and longer service life.
- Teeth that are 1/3 larger than other premium brands allowing up to 20-25 blade sharpening.
- Carbide teeth are ground to a 1200 grit micro finish for razor sharpness the produce clean and smooth cuts and long life.
- Fully hardened, hand-tensioned and heavy tool steel bodies for optimal plate stability and flatness that run true for better cuts.
- Expansion slots for stability and noise reduction.
- Diameter: 10"
- Bore: 5/8"
- Tooth Count: 40
- Tooth Geometry: 4 Alternate Top Bevel (ATB) and on Flat Top Grind (FTG) Raker teeth
- Kerf: .125"
- Plate thickness: .094"
- Hook: +15 degrees
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov