Skip to content

Set of Arno Profile Scrapers 0.023" (.6mm) French Spring Steel with Leather Wallet

by Arno
Sold out

This cabinet scraper case is designed to organize, store and protect cabinet scrapers up to 3-1/4" by 6-1/2" in size. It is made in France from soft split grain suede leather, and has 3 vinyl divider flaps, creating 4 storage pockets. Seams are stitched and reinforced with brass rivets with a brass snap closure. Most scrapers available today are made from spring steel and are hardened to RC 38-42 on the Rockwell hardness scale. These scrapers are made from French spring steel and are hardened to 48-52 RC. This specification gives excellent edge retention while still allowing the “spring” or “flex” in the blade which gives the user control of the tool. This shaped scraper set contains the standard profiles needed to finish irregular profiles. These scrapers are sharpened by polishing the square edges and then drawing out a fine hook with a hardened burnisher. They are 6mm (0.23") thick, which is perfect for standard stock removal.

The Gooseneck scraper (3" x 5") is used for awkward curves in moldings, where part of the outside curve of the Gooseneck scraper will be found to fit the desired radius.

The Convex/concave scraper (2" x 5") can be used at either end to fit hollows and rounds or on spindles. It may also be used as a flat scraper along its parallel edges. The points at the concave end are ideal for scraping in narrow grooves.

The Rectangular scraper (2" x 6") is the standard item for flat surfaces, though (as with the convex/concave) it corners may also be used as scraping points.

Prop 65WARNING: Cancer and Reproductive Harm -