Skip to content
COVID-19 Update: We are open and safely shipping orders with minimal delays. Curbside pickup is available for local orders.
COVID-19 Update: We are open and safely shipping orders with minimal delays. Curbside pickup is available for local orders.

Bob Smith Industries IC-2000™ Black Rubber Toughened & INSTA-SET™ Accelerator

SKU 117H151H

BSI’s IC-2000™ black rubber and carbon toughened Cyanoacrylate is recognized as being the strongest instant glue for non-porous surfaces. Its enhanced shock resistance, strength, and fast bonding make it ideal for use on rubber components, such as Beechcraft’s King Air executive transports. IC-2000™ has found a home in golf club and speaker repair shops, carbon composite bonding by Boeing, rubber door seals by Volkswagen, carbon composites used in aerospace, and many others that need the most durable, shock resistant fast bonding adhesive that is available.

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.

Directions for IC-2000™: Screw on top and cap unit to puncture the seal on the tube. Remove cap and apply IC-2000™ CA to one side of the parts being joined, then hold them tightly together for 10-25 seconds for shock resistant joints. For larger bonding areas, apply serpentine beads of the CA, allowing for the spreading of the adhesive. For maximum flexibility, do not use with an accelerator. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 250° F. Top and tip can be soaked in acetone for cleaning.

Directions for INSTA-SET™: After joining parts with cyanoacrylate (CA, super glue), spray the seams with INSTA-SET™ to cure the CA in 8 seconds. A bead of CA can then be applied to the outside and corners of joints before another application of INSTA-SET™ to reinforce their strength. INSTA-SET™ can also be applied to one part (with CA on the other) before joining for difficult to bond materials. INSTA-SET™ is compatible with all surfaces, including clear plastic and all foams. It also is a great cleaning agent for adhesive residue and scuff marks. Store separately from CAs.

Prop 65WARNING: Cancer and Reproductive Harm -