86 Piece Bowl Sanding Disc Set with 2" and 3" Padded Mandrels, Medium and Soft Pads and 3M 375L Hook and Loop Sanding Discs in 80, 120, 150 and 220 Grit
This bowl sanding set comes with 2 mandrels (2 inch and 3 inch), medium and soft interface pads for each mandrel and 80 genuine 3M 375L hook and loop aluminum oxide sanding discs (10 each 80, 120, 150 and 220 grit)
This set is the perfect solution for sanding vessels, bowls and platers when mounted on the lathe. Using these bowl sander pads will greatly minimize the time and effort it takes to sand your projects. Plus, these pads will achieve superior results with less visible scratch marks.
Both sanding mandrels have 1/4 inch hex shanks that will fit in any variable speed drill or flexible shaft chuck tool.
The main mandrels have thick, firm pads that are designed for sanding broader curved surfaces. The medium pad works best on tighter curved surfaces and the soft pad if for smaller contours. You can even stack both pads together on the mandrel to sand even tighter contours.
Each mandrel and pad have hook and loop fasteners that will work with any hook and loop sandpaper discs.
The set included a generous supply (80 discs) of genuine 3M 375L aluminum oxide, hook and loop, tear resistant film backed sanding discs. The 3M discs have a fast cut rate and long life. 3M aluminum oxide is a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly.
These pads are designed to be used with your piece mounted on the lathe spinning at slower speeds. Also, using a variable speed drill or flexible shaft is recommended to allow optimal control and flexibility as you progress through the sanding process.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov