Skip to content

Products

Filters

$
$

1/4-20 Tri-Lobe Thumb Nuts / Knobs Female Thread with Through Hole

Taytools
Original price $1.49 - Original price $2.49
Original price $1.49 - Original price $2.49
Original price $1.49
$0.79 - $1.39
$0.79 - $1.39
Current price $0.79
in stock

Tri-Lobe thumb nuts / knobs Threaded aluminum through inserts 1/4-20 threads  Head diameter 1-1/4"   Overall height 1/2"  0.450" diameter shoulder...

View full details
Original price $1.49 - Original price $2.49
Original price $1.49 - Original price $2.49
Original price $1.49
$0.79 - $1.39
$0.79 - $1.39
Current price $0.79
Save up to 44% Save %

1/8" x 3/8" x 6" Solid Brass Wear Plate for Wheel Marking Gauge Kit

Taytools
Original price $0.00 - Original price $0.00
Original price $0.00
$5.99
$5.99 - $5.99
Current price $5.99
in stock

  This is a piece of solid brass 1/8" x 3/8" x 6" to be used for wear plates when making marking gauges with our build kit.     WARNING: Cancer and...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$5.99
$5.99 - $5.99
Current price $5.99

10 Cell Small Parts Storage Box with Sliding Lid

Taytools
Original price $0.99 - Original price $0.99
Original price $0.99
$0.99
$0.99 - $0.99
Current price $0.99
in stock

These small 10 cell boxes are perfect for storing and protecting small and delicate parts. Box contains 10 cells with a sliding and removable lid. ...

View full details
Original price $0.99 - Original price $0.99
Original price $0.99
$0.99
$0.99 - $0.99
Current price $0.99

10 inch Hex Shank Forstner Drill Bit Extension for 3/8 Inch Round or Hex Shafts

Taytools
Original price $19.99 - Original price $19.99
Original price
$19.99
$19.99 - $19.99
Current price $19.99
Only 5 left!

This hex shank Forstner bit extension will extend the reach of any Forstner bit with a 3/8" round or hex shank. Note: will not work with auger bits...

View full details
Original price $19.99 - Original price $19.99
Original price
$19.99
$19.99 - $19.99
Current price $19.99

10 Pack C Clamps 2 each 2", 3". 4" 5" & 6"

Taytools
Original price $49.99 - Original price $49.99
Original price $49.99
$49.99
$49.99 - $49.99
Current price $49.99
in stock

This is a set of 10 C-clamp containing 2 each 2", 3", 4", 5", and 6" clamps.  These medium duty C-clamps are the ideal clamping solution for the pr...

View full details
Original price $49.99 - Original price $49.99
Original price $49.99
$49.99
$49.99 - $49.99
Current price $49.99

10 Pack Shim Kit for Magswitch Magjig 150 Switchable Magnets

Taytools
Original price $2.95 - Original price $2.95
Original price $2.95
$2.95
$2.95 - $2.95
Current price $2.95
in stock

Magwitch Magjig 150 magnets have innumerable uses in the woodshop. They can be attached to various jigs and fixtures, and with the turn of a knob, ...

View full details
Original price $2.95 - Original price $2.95
Original price $2.95
$2.95
$2.95 - $2.95
Current price $2.95

10 Piece 1-1/2" Diameter Female Thread Tri-Star Knob Sets

Taytools
Original price $12.99
Original price $12.99 - Original price $12.99
Original price $12.99
Current price $9.99
$9.99 - $9.99
Current price $9.99
in stock

10 pack of Tri-Star Knobs 1/4-20 solid brass threaded through insert 1-1/2 inch wide x 7/8 inch tall 5/8" diameter x 5/16" tall shoulder Black po...

View full details
Original price $12.99
Original price $12.99 - Original price $12.99
Original price $12.99
Current price $9.99
$9.99 - $9.99
Current price $9.99
Save 23% Save %

10 Piece 1-3/16" Diameter Female Thread Tri-Star Knob Sets

Taytools
Original price $12.99
Original price $12.99 - Original price $12.99
Original price $12.99
Current price $9.99
$9.99 - $9.99
Current price $9.99
in stock

10 pack of Tri-Star Knobs 1/4-20 solid brass threaded through insert 1-3/16 inch wide x 11/16 inch tall .600" diameter x .125" tall shoulder Blac...

View full details
Original price $12.99
Original price $12.99 - Original price $12.99
Original price $12.99
Current price $9.99
$9.99 - $9.99
Current price $9.99
Save 23% Save %

10 Piece 2-1/4" Diameter Female Thread 5 Star Knob Sets

Taytools
Original price $13.99 - Original price $15.99
Original price $13.99 - Original price $15.99
Original price $13.99
Current price $10.99
$10.99 - $10.99
Current price $10.99
in stock

10 each star knobs Threaded through inserts 2-1/4" diameter 1" height 0.800" diameter shoulder Available in three (3) different thread sizes: 3/8...

View full details
Original price $13.99 - Original price $15.99
Original price $13.99 - Original price $15.99
Original price $13.99
Current price $10.99
$10.99 - $10.99
Current price $10.99
Save up to 31% Save %

10 Piece 303 Stainless Steel Diamond Knurled Thumb Screw Sets

Taytools
Original price $17.99 - Original price $38.99
Original price $17.99 - Original price $38.99
Original price $17.99
$17.99 - $38.99
$17.99 - $38.99
Current price $17.99
in stock

10 pack/pieces knurled head 303 stainless steel thumb screws with shoulders and flat tips The knurled surface on these thumb screws provides optim...

View full details
Original price $17.99 - Original price $38.99
Original price $17.99 - Original price $38.99
Original price $17.99
$17.99 - $38.99
$17.99 - $38.99
Current price $17.99
Save up to 9% Save %

10 Piece 5/16" x 18 TPI Sliding T Bolts

Taytools
Original price $18.99 - Original price $20.99
Original price $18.99 - Original price $20.99
Original price $18.99
$9.16 - $10.42
$9.16 - $10.42
Current price $9.16
in stock

10 piece sliding T bolts 5/16 x 18 TPI threads Head size is 0.440 inch wide x 0.700 inch long x 0,120 inch thick Brass plated  Perfects for all m...

View full details
Original price $18.99 - Original price $20.99
Original price $18.99 - Original price $20.99
Original price $18.99
$9.16 - $10.42
$9.16 - $10.42
Current price $9.16
Save up to 50% Save %

10 Piece Female Threaded T Knobs 2" Wide 1" High

Taytools
Original price $8.88 - Original price $14.99
Original price $8.88 - Original price $14.99
Original price $8.88
$8.88 - $9.99
$8.88 - $9.99
Current price $8.88
in stock

10 each T knobs Threaded through inserts 2" long  1" high 0.750" diameter shoulder Available in the following sizes: 1/4-20, 5/16-18 and 3/8-16 ...

View full details
Original price $8.88 - Original price $14.99
Original price $8.88 - Original price $14.99
Original price $8.88
$8.88 - $9.99
$8.88 - $9.99
Current price $8.88
Save up to 33% Save %

10 Piece Female Threaded T Knobs-1" to 2-1/2" Wide (1.125" high)

Taytools
Original price $12.99 - Original price $13.99
Original price $12.99 - Original price $13.99
Original price $12.99
Current price $9.99
$9.99 - $9.99
Current price $9.99
in stock

10 each T knobs Threaded through inserts 1.125" high 0.750" diameter shoulder Available in the following sizes: Bolt Size Threads Per Inch Wid...

View full details
Original price $12.99 - Original price $13.99
Original price $12.99 - Original price $13.99
Original price $12.99
Current price $9.99
$9.99 - $9.99
Current price $9.99
Save up to 29% Save %

10 Piece Soft Silicone Chisel Edge Guard Set

Taytools
Original price $14.99 - Original price $14.99
Original price $14.99
$14.99
$14.99 - $14.99
Current price $14.99
Out of stock

Protect the sharp edges of your chisels from damage with these silicone edge guards. Made from soft, flexible silicone rubber. Will not slide off c...

View full details
Original price $14.99 - Original price $14.99
Original price $14.99
$14.99
$14.99 - $14.99
Current price $14.99
Sold out

10 Piece Solid Brass Diamond Knurled Thumb Screw Sets

Taytools
Original price $14.99 - Original price $35.99
Original price $14.99 - Original price $35.99
Original price $14.99
$14.99 - $35.99
$14.99 - $35.99
Current price $14.99
in stock

10 pack/pieces knurled head solid brass thumb screws with straight shoulders and flat tips The knurled surface on these thumb screws provides opti...

View full details
Original price $14.99 - Original price $35.99
Original price $14.99 - Original price $35.99
Original price $14.99
$14.99 - $35.99
$14.99 - $35.99
Current price $14.99
Save up to 30% Save %

10 Piece Solid Brass Router Template Bushings Guide Bearings Set 464985

Taytools
Original price $27.99 - Original price $27.99
Original price $27.99
$27.99
$27.99 - $27.99
Current price $27.99
Only 2 left!

Ten (10) piece router guide template set Precision machined solid brass Contains two (2) lock nuts and OD sizes 5/16", 3/8", 7/16", 1/2", 5/8", 3/...

View full details
Original price $27.99 - Original price $27.99
Original price $27.99
$27.99
$27.99 - $27.99
Current price $27.99

10" Hex Shank Auger Forstner Bit Extension for 7/16 Inch Hex Shafts

Taytools
Original price $19.99
Original price $19.99 - Original price $19.99
Original price $19.99
Current price $17.99
$17.99 - $17.99
Current price $17.99
in stock

This hex shank Auger bit extension will extend the reach of any auger bit sized 13/16” and larger that has a 7/16” hex shank. The overall length is...

View full details
Original price $19.99
Original price $19.99 - Original price $19.99
Original price $19.99
Current price $17.99
$17.99 - $17.99
Current price $17.99
Save 10% Save %

10" Round Center Finder Compass for Wood Turners Lathe Work 114601

Taytools
Original price $17.99
Original price $17.99 - Original price $17.99
Original price $17.99
Current price $14.99
$14.99 - $14.99
Current price $14.99
in stock

This center finder is perfect for laying out bowls, trays and platters Finding the center of irregular shapes to optimize yield is simple and easy...

View full details
Original price $17.99
Original price $17.99 - Original price $17.99
Original price $17.99
Current price $14.99
$14.99 - $14.99
Current price $14.99
Save 17% Save %

10" x 4" x 9" Deep ABS Plastic Dust Hood, 4" OD (114899) (DCE)

Taytools
Original price $16.99
Original price $16.99 - Original price $16.99
Original price $16.99
Current price $7.48
$7.48 - $7.48
Current price $7.48
Only 1 left!

These dust hoods can be used to collect dust from a variety of machines or can be placed on a table close to where dust is being produced. Built i...

View full details
Original price $16.99
Original price $16.99 - Original price $16.99
Original price $16.99
Current price $7.48
$7.48 - $7.48
Current price $7.48
Save 56% Save %

10-1/4" x 4-1/4" 125 Micron (120 Grit) 3M™ Diamond Flattening Plate Sharpening Stone Affixed to 5/16" Float Glass

Taytools
Original price $0.00 - Original price $0.00
Original price $0.00
$24.99
$24.99 - $24.99
Current price $24.99
Out of stock

Using oil and water stones are a fantastic and economical approach to sharpening all types of edge tools. Over time all stones tend to wear in the ...

View full details
Original price $0.00 - Original price $0.00
Original price $0.00
$24.99
$24.99 - $24.99
Current price $24.99
Sold out

10-32 x 12" Long Threaded Rod

Taytools
Original price $1.99
Original price $1.99 - Original price $1.99
Original price $1.99
Current price $1.79
$1.79 - $1.79
Current price $1.79
in stock

This 12" 10-32 threaded rod rod can be combined with any of he Matchfit nuts or knobs to create custom jigs and fixtures. Unfinished steel.  WA...

View full details
Original price $1.99
Original price $1.99 - Original price $1.99
Original price $1.99
Current price $1.79
$1.79 - $1.79
Current price $1.79
Save 10% Save %

10-Piece Set Nylon Reinforced Spring Clamps with Non-Marring Swivel Pads

Taytools
Original price $4.99 - Original price $22.99
Original price $4.99
$4.99 - $22.99
$4.99 - $22.99
Current price $4.99
in stock

These nylon Spring Clamps are versatile, lightweight making them the perfect clamping solution for the woodworker, hobbyist, crafter or DIY enthusi...

View full details
Original price $4.99 - Original price $22.99
Original price $4.99
$4.99 - $22.99
$4.99 - $22.99
Current price $4.99

12 Pack of Acid/Glue Brushes

Enkay
Original price $3.99 - Original price $3.99
Original price
$3.99
$3.99 - $3.99
Current price $3.99
Out of stock

This assortment pack of 12 disposable acid and glue brushes are made of 100% pure black horsehair bristles and have tin metal handles. These econom...

View full details
Original price $3.99 - Original price $3.99
Original price
$3.99
$3.99 - $3.99
Current price $3.99
Sold out

12 Pack Taylor Toolworks Branded Shop Pencils

Taytools
Original price $1.40 - Original price $10.49
Original price $1.40 - Original price $10.49
Original price $1.40
$1.26 - $9.99
$1.26 - $9.99
Current price $1.26
in stock

12 pack Taylor Toolworks branded shop pencils with erasers in either white or natural finish.  Pencil Specifications: Diameter: .295” Lead: .09...

View full details
Original price $1.40 - Original price $10.49
Original price $1.40 - Original price $10.49
Original price $1.40
$1.26 - $9.99
$1.26 - $9.99
Current price $1.26
Save up to 30% Save %